Aurbo99 wrote:OK.. I'm looking at a gerber file with all pads, traces and holes.Now using CadLink 5;
Import > POSTSCRIPT Export > Gerber RS-274-X
NEXT
select "Treat White areas as holes"
NEXT
under "Geometry Settings" I changed 0.001 to 0.02 default line width
NEXT
locate your PS print file and OK
then complete the sequence of naming and saving.Using GerbMagic, open the file up and you should see what you need.
Where do i find CADLink5???????????? would be great if i could convert my ExpressPCB to Gerber after spending 2 hours trying to work out Eagle and PCBArtist....i converted to a DXF file doing as said in earlier post but couldnt get it to open as a gerber even though it said it was...HELP!!!
G - I think they are talking about LinkCAD...here's a link:
If not, it might do what you need to do...
R
Here's another great site! It looks like a perl script, that can convert PDF's into Gerber files! You might check it out...
There's a note on the page, about running on a Windoze platform...
Roger
Thanks Roger again...i had LinkCAD but once i reread it all cranked up LinkCAD and GerbMagic and hey presto have a couple of GRB files on puter now.....Nows the tricky bit..a couple of places say about drill sizes..or maybe i should enquire with my files first and see what they say....i better put ZC on the board before i get to ahead of myself now.....and find a free version of LinkCAD because ill guarantee it will be used a bit more now..
i called expressPCB and they said they will send you the gerber files for a given project after you order boards from them.
i haven't tried this but maybe someone here can?
-=drew
51fordf2 wrote:Here's another great site! It looks like a perl script, that can convert PDF's into Gerber files! You might check it out...
Roger:
Though I never actually made PCBs with this, I did run the files through one of the on-line PCB verifiers and it worked great.
The problem for me, though, was that it does not handle silkscreens for labels -- it just would not work.
But for the copper files and the drill files it worked just fine.
YMMV.
\dmc
PS: Yes, did it on a Mac.
Aurbo99 wrote:OK.. I'm looking at a gerber file with all pads, traces and holes.1 sided.
here's how I did it.
Windows XP, add a new printer POST SCRIPT, and have it print to file.
http://www.uwo.ca/its/print/psfile.html will show you how.
Open your ExpressPCB file and Print, selecting the new PS printer.
I chose TOP and BOTTOM layer only.. it will ask you to name a the File.
Now using CadLink 5;
Import > POSTSCRIPT Export > Gerber RS-274-X
NEXT
select "Treat White areas as holes"
NEXT
under "Geometry Settings" I changed 0.001 to 0.02 default line width
NEXT
locate your PS print file and OK
then complete the sequence of naming and saving.Using GerbMagic, open the file up and you should see what you need.
A bump from the past... Did anyone ever try this and use the resultant Gerbers to create boards? I tried this today and can create a good top copper/bottom copper/silkscreen layer ok but don't see a way to create the drill file or solder mask files. Just trying to save the $60 that ExpressPCB wants for the set of files...
Also - when I print the .ps file, it always prints the footer with the document name (I have that option unchecked) so it shows up on the gerber output as well...

