Stumbled on this.. ...
 
Notifications
Clear all

Stumbled on this.. does it work?

17 Posts
12 Users
0 Reactions
35.6 K Views
Aurbo99
Posts: 2804
Moderator
Topic starter
(@aurbo99)
Member
Joined: 19 years ago
[#2464]

Take an Express.pcb file, in Expresspcb export it to DXF

http://www.linkcad.com/ grab LinkCad

Import Format = DXF Export Format = Gerber RS-274-X

Select your file and REPAIR OPEN POLYGONS

in my test I went into view tab and removed all the silkscreen lines back to Convert tab and Repair. then next

File Structure-- rename 0.gbr to what you want and complete the conversion.

Open the newly created .gbr file in a gerber viewer of notepad..

What do YOU get?

I've no way to confirm if the resultant file is viable or not.. but it looks ok in notepad (to me at least)


16 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

I cannot see any way to export the traces. All I see are 'pads' (top and bottom) silkscreen, holes and text.

I use the .dxf for the holes a lot when I use the cnc to drill boards.


Reply
Aurbo99
Posts: 2804
Moderator
Topic starter
(@aurbo99)
Member
Joined: 19 years ago

OK.. I'm looking at a gerber file with all pads, traces and holes.

1 sided.

here's how I did it.

Windows XP, add a new printer POST SCRIPT, and have it print to file.

http://www.uwo.ca/its/print/psfile.html will show you how.

Open your ExpressPCB file and Print, selecting the new PS printer.

I chose TOP and BOTTOM layer only.. it will ask you to name a the File.

Now using CadLink 5;

Import > POSTSCRIPT Export > Gerber RS-274-X
NEXT
select "Treat White areas as holes"
NEXT
under "Geometry Settings" I changed 0.001 to 0.02 default line width
NEXT
locate your PS print file and OK
then complete the sequence of naming and saving.

Using GerbMagic, open the file up and you should see what you need.


Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 20 years ago
Wayne J wrote:...when I use the cnc to drill boards.

Show off!

Jeff


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago
jeffmill wrote:Show off!

Jeff

🙂
Hopefully my new project will go well, then I will be firing up the cnc to drill them also. :p

😉


Reply
pete
Posts: 562
 pete
(@pete)
Honorable Member
Joined: 20 years ago

Another Showoff.


Reply
pixeldigger
Posts: 144
(@pixeldigger)
Estimable Member
Joined: 19 years ago
Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 20 years ago

Mike,
Oh yeah, I see me making one of those... The problem is I need a cnc to make one LOL. I wish Wayne was a neighbor of mine... Hmmm... thinking... "Honey, get the phone book! We need the phone number of a few realtors, and the electric company in North Carolina"

(Jeff ducks as the phone book come flying across the room...)

J


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago

Is there a Vixen plug-in that will control this? That would allow kindof a boot-strap approach to building a bigger display.

don


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

If you are interested, www.crankorgan.com is a great place to start. The guy is a bit abrasive, but has some very cool designs and great support if you purchase from him. I have all of the motors and electronics working for a 3 axis machine. If someone would like to experiment with building a CNC very cheaply, PM me and we can work something out.

I talked with a few people that built his Brute PCB Mill and all said it worked great for Ones, two's and prototype boards. I now see he has a new PCB Mill Plan with even simpler setup. It's true DIY and most of his designs were meant to use a combination of Hardware Store items and Aluminum Window Channel (commercial).


Reply
Page 1 / 2
Share: