Free PCB Design Sof...
 
Notifications
Clear all

Free PCB Design Software?

38 Posts
24 Users
0 Reactions
32.7 K Views
g2ktcf
Posts: 3651
(@g2ktcf)
Famed Member
Joined: 18 years ago

Re: Pcb design software download site?

I was originally using PCBExpress...but I wanted the flexibility of getting Gerber Files and Excelon Drill Files. Does PCBArtist do that?


Reply
Posts: 76
(@edward57)
Trusted Member
Joined: 18 years ago

I use sprint-layout v5. not free ($29) but has a good library and can generate all the popular file types, and printing PDF with a printer calibration to ensure the sizes are correct.

Very pleased with the results it gives..


Reply
NogginBoink
Posts: 482
(@nogginboink)
Honorable Member
Joined: 19 years ago

I use Cadsoft Eagle (www.cadsoft.de). Be sure to download the tutorial from the downloads page and go through it.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Angelica Jolly,
There are various free and low cost packages around. Just bear in mind that you usually get what you pay for. Take advantage of the demos offered by the various vendors and see what suits you.

jonelee,
I use Altium DXP 2004 and it's quite good. Not sure how much a new licence for it is - probably around the USD $5000 at a guess. I always make my own component library parts as I really don't trust any of the pre-made ones. Besides once you get the hang of it, making a library part only takes a few minutes. Just make sure you have a set of digital callipers!


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago

Cadsoft Eagle is quite popular with the hobbyist/Open Hardware community because it has very good "bang for the buck" and is available for multiple platforms including Linux.

Both SparkFun Electronics and Adafruit (aka Limor Fried) use Eagle for their design work. SFE provides an Eagle library with every component they have ever used in a design since switching to Eagle, and Adafruit provides Eagle projects for most of their products (which include the library info for the components used).

Eagle is free for board/layer limited (4x3 inches and 2 layers IIRC) noncommercial use, and I believe $49 for unlimited noncommercial use. Commercial use is MUCH more expensive.

Eagle's free version limitations are more than enough for MANY hobbyist projects.


Reply
Page 2 / 8
Share: