I looked at using these a couple years ago - - a common link to these was: http://www.cabelas.com/product/703738.uts?WT.tsrc=CRR&WT.mc_id=crrdtfd - $40/3 - not bad!
Someone at DLA used these and while it was pretty ugly during the day, it looked great at night!
I will add some close up pics of the rods and sphere. In a few days
Here is some more detail....
I drilled out the lip inside each hole of the sphere to allow the 1/2" pvc to slide in 2-3"
We only used every other hole so 13 total worried about strength of sphere. We filled
the sphere through each pvc stub pc with the expandable foam to add stability.
Each rod has three colors Blue - Green - Red and then the strobe (wire for it runs through pvc and comes out
a hole near the bottom) we cut the 100 string lights down to 50
and soldered connections just for weight although it still looks ok at night. We are getting a lot of compliments.
Connections are a work in progress as the pic shows kinda all over the place.
I have just started looking into RGB and that maybe a way to go...
Still working on timing of the hole thing to simulate better. I will do my best to get some additional photos
here over the next few days.
Hope everyone has a safe and happy holiday season.
pics please!!!!
Sorry. We have been trying to remodel a bathroom and kitchen
I will do my best to get some pics next few days
Dennis
thank you!!
I originally built this fireworks back in 2010. I then converted it to all pixels in 2017 and programmed via xLights.
Here is the most recent video of it.
Sent from my iPhone using Tapatalk

