Standalone Wirefram...
 
Notifications
Clear all

Standalone Wireframe Controller

32 Posts
14 Users
0 Reactions
19.4 K Views
DennyMo
Posts: 236
(@dennymo)
Reputable Member
Joined: 19 years ago

I've been thinking of using one of these PLC modules for wireframe animations:
http://www.cubloc.com/product/03_02.php

The CUSB-22R controls 10 relays that could be used for non-fading applications, the CUSB-36R has 16 of them. One thing I'm uncertain of is whether or not the Analog Outputs (0-5V PWM) could be used to control fading. Any thoughts?


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago
DennyMo wrote:I've been thinking of using one of these PLC modules for wireframe animations:
http://www.cubloc.com/product/03_02.php

The CUSB-22R controls 10 relays that could be used for non-fading applications, the CUSB-36R has 16 of them. One thing I'm uncertain of is whether or not the Analog Outputs (0-5V PWM) could be used to control fading. Any thoughts?

I think these would be too expensive for me, but I'm sure they would work. Right now I'm heading down the route of using a stripped-down REN-8SS. No 485, No RJ45 connectors. I think I have the PIC code worked out, but haven't purchased the board yet. May simply work it out on a breadboard during an A.D.D afternoon. I want to finish my CNC and then will focus on the wireframe stuff.

By going this route, I could always convert them for regular computer-control use.


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

I'd leave the RJ45 and 485 chip in the board (you can always leave them unpopulated) so that you have the potential to either trigger or specify a sequence.
/mike


Reply
Posts: 133
(@mel4853)
Estimable Member
Joined: 19 years ago

Haven't had a alot of time, but here's what I got. The program to download from PC came from Peter Olsen awhile back and is done with Power Basic and saves to a 24LC256(Saved these files for something,now I know). I converted to a pic 12F683 from his picaxe program. Seems to be working just fine with 16 outputs. It's done in Picbasic Pro but I can give hex flie out no problem. Should be easily converted up to 56 outputs as Peter has writin. One other change is I'm using the mbi chip from the Grinch setup instead of the 74HC595. Much easier, and I have these on hand. I'll sure try and get a schematic drawn up maybe this week.THIS HAS NO DIMMING just on off. Hope this helps.


Reply
Posts: 502
(@mmulvenna)
Honorable Member
Joined: 19 years ago
kychristmas wrote:Next Year, I would like to build a number of animated Wireframes. Rather than control each Channel in Vixen, I would like to simply create a simple stand-alone controller that to run them.

I was thinking about creating 8 channel controllers that use a PIC with a simple program to cylcle through the channels. Does this make sense or is there an easier way to do this? The nice thing about the PIC control is that I would be able to create sequences that are more ellaborate than simply cylcing through the channels.

I want to do a few wireframes similar to these fron Kindla Christmas site:


If you are interested in these too, go to their site. He has some of the most ellaborate animated frames I have seen.

The toy factory is actually done on coroplast not a wire frame. If you look at his site you will see the build instructions.....

BTW I think it has well over 50 channels and i have started the sequencing for making one of these out of wireframes. I did get his approval to do so and will make some changes so it is not identical.


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago

Yeah, it was pretty obvious just from the pictures that it wasn't a true "wireframe", but I am very familiar with how he does it. It was simply an example. Regardless of whether its built on Coroplast, Plywood, or true Wireframe it the same animation concept so the subject of my post here was applies. .

Believe it or not, the Toy factory portion could be managed with less than 8 channels. He may choose to use more for simplicity, but if you look at the animation closely, there are less than 8 frames.


Reply
Posts: 502
(@mmulvenna)
Honorable Member
Joined: 19 years ago
kychristmas wrote:Yeah, it was pretty obvious just from the pictures that it wasn't a true "wireframe", but I am very familiar with how he does it. It was simply an example. Regardless of whether its built on Coroplast, Plywood, or true Wireframe it the same animation concept so the subject of my post here was applies. .

Believe it or not, the Toy factory portion could be managed with less than 8 channels. He may choose to use more for simplicity, but if you look at the animation closely, there are less than 8 frames.

I agree there could be fewer channels but aren't there 14 channels involved in just the 7 elements for the units position and the 7 elements for the tens position of the incremental numbers, or are my old eyes deceiving me again?


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago
mmulvenna wrote:I agree there could be fewer channels but aren't there 14 channels involved in just the 7 elements for the units position and the 7 elements for the tens position of the incremental numbers, or are my old eyes deceiving me again?

Again, I'm not copying it. I did forget about his counter, but I certainly don't think that's worth the Channels. I have a number of concepts that I am planning on borrowing ideas from. My original design looked pretty good and it was only 4 channels.

I love Kindla's stuff, but its way more complicated than I want to get involved with. He also has it integrated with his train. I'm looking at just the Toy Factory, not the entire thing.

Kelly


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

A little off topic, but still about Wireframes. I am tossing an idea around in my head..(scary), to implement it, I need a wireframe of a person playing a Guitar. Would like it about 4'-5' tall. Have any of you seen anything like that for sale anywhere?
Thanks,
Randy


Reply
Posts: 502
(@mmulvenna)
Honorable Member
Joined: 19 years ago
kychristmas wrote:Again, I'm not copying it. I did forget about his counter, but I certainly don't think that's worth the Channels. I have a number of concepts that I am planning on borrowing ideas from. My original design looked pretty good and it was only 4 channels.

I love Kindla's stuff, but its way more complicated than I want to get involved with. He also has it integrated with his train. I'm looking at just the Toy Factory, not the entire thing.

Kelly

Agreed, I got his permission to copy parts with some changes. I am going to do it with wireframes as opposed to the coro....He does some great stuff. Im going to do the count.....


Reply
Page 3 / 4
Share: