Standalone Wirefram...
 
Notifications
Clear all

Standalone Wireframe Controller

32 Posts
14 Users
0 Reactions
19.4 K Views
Posts: 133
(@mel4853)
Estimable Member
Joined: 19 years ago

I might have what you want. Have a toy shop based on that picture. Uses a pic12f675 and 2 595 chips if I remember right. Let me look around for all the board files and code. Got it on one of my computers somewhere. You just give it 120VAC and runs by itself. Has ran for 3 years no problems.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Awesome. Please post the whole package as a zip for all to see if you would.

thanks!

mel4853 wrote:I might have what you want. Have a toy shop based on that picture. Uses a pic12f675 and 2 595 chips if I remember right. Let me look around for all the board files and code. Got it on one of my computers somewhere. You just give it 120VAC and runs by itself. Has ran for 3 years no problems.

Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
kjburns31 wrote:I have 224 dimmable channels under Vixen Control if I want, but I don't want to have to program the wireframe animation into each sequence. I simply want to turn the entire wireframe on or off. These are not complicated sequences at all. I don't even need dimming really.

Ah, like having "routines" or mini-sequences embedded directly in the props, and they are self-running or triggered to start running by Vixen. Good idea.

don


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago
mel4853 wrote:I might have what you want. Have a toy shop based on that picture. Uses a pic12f675 and 2 595 chips if I remember right. Let me look around for all the board files and code. Got it on one of my computers somewhere. You just give it 120VAC and runs by itself. Has ran for 3 years no problems.

That would be excellent. Please let me know if you find it.

I looked at what JRock posted and I have ordered the the necessary PICS and parts to build a 8 Channel PIC-based sequencer.


Reply
Posts: 133
(@mel4853)
Estimable Member
Joined: 19 years ago

Can't find it but give me a little time, little busy now ha, ha. I'll redo schematic and code. Would like to see that cnc machine.


Reply
Posts: 133
(@mel4853)
Estimable Member
Joined: 19 years ago

How many channels are you thinking? Mine has 16.


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago

I can do whatever, but I was hoping to keep it simpler than 16, but you never know.

Funny that you mention the CNC, I just hauled the CNC stuff out of storage and started getting moving again. Hope to have some progress posted on my personal site soon.


Reply
Posts: 28
(@docwakins)
Eminent Member
Joined: 19 years ago

Not sure if you have seen this - just stumbled upon it and remembered seeing a thread. 8 channels, SD Contained...

http://www.instructables.com/id/Christmas-Lights-to-Music-Using-Arduino/


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Oops...didn't read the other messages closely enough.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The big benefit of the Arduino approach is that people have spent a lot of time on programming tools, which makes it a lot easier to set up the standalone controller.


Reply
Page 2 / 4
Share: