Fountain Pump
 
Notifications
Clear all

Fountain Pump

9 Posts
6 Users
0 Reactions
2,889 Views
Posts: 116
Topic starter
(@djred2000)
Estimable Member
Joined: 13 years ago
[#36333]

I'm thinking about building a small water display and was wondering if anyone can recommend any pumps they've used. I would like to be able to control the pump speed. I know it's much easier to use 12 volt DC pumps but I would like to us AC pumps so I can use one's that are powerful. Are there any that can be controlled using AC phase control from a SSR dimming board? I think it depends on the type of motor in the pump.


8 Replies
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago
djred2000 wrote:I'm thinking about building a small water display and was wondering if anyone can recommend any pumps they've used. I would like to be able to control the pump speed. I know it's much easier to use 12 volt DC pumps but I would like to us AC pumps so I can use one's that are powerful. Are there any that can be controlled using AC phase control from a SSR dimming board? I think it depends on the type of motor in the pump.

A member here, iaroadkill, has a fountain display.
The control of an AC motor depends on the motor type. A "universal" AC/DC motor can be controlled with a SSR, like a wood router, or electric drill motor, but induction type motors require a frequency change to control motor speed.
Some fountain builders use the boat bilge pumps - which would be DC motor types. There may be other choices. I think that "sump pumps" tend to be of the induction types and thus not easily/cheaply speed controlled.


Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

One technique is to use an inexpensive sump style pump and instead focus on control of gate valves for the output of the pump.

Using this technique involves a diverter valve which redirects the flow from the fountain back into the sump.

Food for thought..


Reply
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago

I used 120v pond pumps.
Although it looked like i controlled speed of the pump, I did not. I used extra valves to bleed off pressure/flow and make it look like the motor was speed controlled.


Reply
Posts: 1133
(@toozie21)
Noble Member
Joined: 19 years ago

What kind of valves can be controlled like that?

Short and badly typed since written from my phone...


Reply
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago

I use 24 V orbit sprinkler valves.


Reply
Posts: 116
Topic starter
(@djred2000)
Estimable Member
Joined: 13 years ago

I was thinking about going the valve route. It looks like all the 120 volt pond pumps can only be speed controlled using VFDs and that is cost prohibitive.


Reply
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago

I also use multiple pumps.
When you get to many jets going, they will all start to get shorter.
I have it rigged up with my Arduino and my Vixen3 program to turn on more pumps as needed.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Most good pumps come with a flow valve to control water flow. Your local hardware store has PVC valves that you can control flow. I use one for a squirting frog.

Sent from my Nexus 7 using Tapatalk


Reply
Share: