Notifications
Clear all

connector

8 Posts
6 Users
0 Reactions
2,703 Views
Posts: 98
Topic starter
(@augus)
Estimable Member
Joined: 11 years ago
[#40680]

are 3 wire connector the same from store to store, standardize? I can connect them together not worry about fit.


7 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Not always. There appear to be 2 different diameters available, 13.5mm & 15mm. They don't interchange, so you need to be sure you buy the same sizes.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

If you order from one vendor I would always order from the same vendor when you need more and you will need more. I would recommend that you order at least two times what you think you want. They are cheap so just get them all now. I have ordered more of them twice a year the last two years. I hope I have enough spares now that I will not have to order again in 2016. But then my ideas for more props keep growing.......


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
Augus wrote:are 3 wire connector the same from store to store, standardize? I can connect them together not worry about fit.

I asked this question a while ago and from what I see no two vendors cables will play nice with each other.

May I suggest another solution. I use these, and they work great.

http://www.amazon.com/gp/aw/d/B00VZOHVSE/ref=mp_s_a_1_7?qid=1453137156&sr=8-7&pi=AC_SX118_SY170_QL70&keywords=crazyeve&dpPl=1&dpID=41jRVTCYN5L&ref=plSrch

James

Sent from my SM-G900V using Tapatalk


Reply
Posts: 98
Topic starter
(@augus)
Estimable Member
Joined: 11 years ago

Thanks glad I check before buying extension from another supplier (cheaper)

Sent from my SM-G925T using Tapatalk


Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago

Concur - I have received 13.5mm from 2 different vendors and they do not connect together. Just enough off to not fit...

I have also seen this mentioned but to say again as I just learned, test every pigtail and t-connector. In a recent batch of 20 I had 2 where v+ and data were swapped. Fortunately I found before zapping something of value!

Sent from my iPhone using Tapatalk


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I have heard of bad pigtails/connectors, but I can say after using at least 150, probably more, I have not had one failure or miswired connector of any kind that was not caused by my own stupidity. All my waterproof connectors come from Ray. The only key to watch is what the power connector wire is. if you mess up data and ground things just don't work and and after fixing that the lights worked fine. The only time I've lost a pixel(s) is when I got in a hurry and put power where it does not belong.


Reply
Posts: 485
(@jerry-rigs)
Honorable Member
Joined: 11 years ago

Even on the same diameter, there are different "keying" methods. Some use a flattened area of the circle, others use more of a key looking cutout. jnealand has it right. Find a style you like stock up and buy extras. If you can, get heavier gauge and longer leads. I heard rumors that some suppliers can be flexible on those matters. Also, in support of DMJPixel, make yourself a jig and test everything.


Reply
Share: