Another problem sol...
 
Notifications
Clear all

Another problem solved.

9 Posts
4 Users
0 Reactions
3,371 Views
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago
[#40727]

I was trying to come up with an idea on how to mount 2 power supplies and a 682. Finally figured it out. I put 2 CG boxes back to back, a 1000 and 1500. I put 2 power supplies in the 1500 and the 682 in the 1000. The power supplies are strapped in with Velcro and a small strip of wood at the bottom so the supplies wouldn't slide down. I used a Cat5e RJ45 keystone coupler for attaching the network cable. I'm not worried about being waterproof because this setup will be covered by something. All I have to do now is wire it all up and add ventilation to the power supply box. Another problem solved

Sent from my Nexus 7 using Tapatalk


8 Replies
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

It can be done in one

IMG 20141130 002205

IMG 20140629 170755

Reply
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago
duramadmax wrote:It can be done in one

I thought of that and decided it was too confining and I didn't want anything to interfere with air circulation on the power supplies.

Sent from my Nexus 7 using Tapatalk


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

It is "stuffy" in there but 4 units have been used two seasons; on 45 days straight from 40 to 80 degrees and no problems.....


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
duramadmax wrote:It can be done in one

Snug as a bug in a rug. I like it! I wish I could have done that with the F16v2 with expansion board. But I just couldn't get it all in. Surprised I got 32 cords out of one cg1500.


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago
Skunberg wrote:Snug as a bug in a rug. I like it! I wish I could have done that with the F16v2 with expansion board. But I just couldn't get it all in. Surprised I got 32 cords out of one cg1500.

Wow. That's a lot of cords.....


Reply
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

I just installed 2 in the lid, and my E682 in the main part of the enclosure.. no issues and if you are in a cold climate the power supplies can keep your E68x warm 🙂

Tory


Reply
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago

I can't mount mine on the power supplies because it would void the 2 year warranty on the supplies. I thought of mounting the 682 on the lid but didn't want hot air from the power supplies blowing on the controller.

Sent from my Nexus 7 using Tapatalk


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago
pmiller wrote:I can't mount mine on the power supplies because it would void the 2 year warranty on the supplies. I thought of mounting the 682 on the lid but didn't want hot air from the power supplies blowing on the controller.

Sent from my Nexus 7 using Tapatalk

Ahhh. I gotcha....


Reply
Share: