X lights scheduler
 
Notifications
Clear all

X lights scheduler

4 Posts
4 Users
0 Reactions
2,099 Views
Posts: 97
Topic starter
(@thyndman)
Estimable Member
Joined: 15 years ago
[#55274]

Hi all. Question about x lights scheduler. My show is set up on scheduler to start at 5pm and go off at 10pm. All working great, question is, can I have the show run to a longer time without music. Meaning music and lights to 10 pm, just lights till 1200. I have outside speakers, can x lights do this.
I realize a fm transmitter would solve it but still like music outside. Also tried the fm with not much luck.
Thank you, merry Christmas, Tom


3 Replies
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I dont use Xlights scheduler but I would assume you can have another playlist start at 10PM and run until 12:00. You would create an animation sequence and just have it repeat on the playlist


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I believe you can. Just set up another playlist to run from 10:01 PM to 12:00 PM, and set the volume to 0% at the top of the Scheduler window.


Reply
Posts: 52
(@davwav02)
Trusted Member
Joined: 13 years ago

Yes, you can. I have had this type of setup ever since I started using xLights. You just need to create a separate sequence (an animation as was mentioned in the other post) and set it to run at whatever time you'd like. I have it run all night, and I just have every window set to 'Marquee' with the motion turned off, so it just looks like multi-color lights in every window.

Post showLights

After re-reading your post, I noticed that you refer to having music playing separate from the sequence during this time. This is something I do for my 'Pre-show' lights. I start the pre-show around 3:30 and it runs until the regular show starts at 5:00. Really, the main reason I added the pre-show is that I work nights, so I'm sometimes not home when the light show starts at 5p, so the pre-show serves as a sound/light test, so I can see that everything is working properly when I leave. I bought an album of classical holiday MP3s from Amazon for the pre-show music and created a basic twinkling animation for the lights. In order to run both at the same time, you go into your play list and for the animation, check the box that says 'Run everything in this step in every step'.

Pre show

Reply
Share: