Tree Dazzler is it ...
 
Notifications
Clear all

Tree Dazzler is it hackable ?

63 Posts
19 Users
0 Reactions
35 K Views
GWOOLSEY56
Posts: 98
(@gwoolsey56)
Estimable Member
Joined: 15 years ago

I see your point. I will untangle them tonight and do a short video.
Do straight RGB bulbs only have 6 connections? I thought they had 8. Look at the bulb connections, not the wires connected to the circuit board.:)


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I'm pretty sure those are working as dumb RGB strings so each string is always the same color. They had a smart string version but they dumbed it down to get the price point lower for the average consumer.


Reply
GWOOLSEY56
Posts: 98
(@gwoolsey56)
Estimable Member
Joined: 15 years ago
Gilrock wrote:I'm pretty sure those are working as dumb RGB strings so each string is always the same color. They had a smart string version but they dumbed it down to get the price point lower for the average consumer.

You are correct. ...[emoji6] https://vimeo.com/198276812


Reply
yohan
Posts: 85
(@yohan)
Trusted Member
Joined: 13 years ago

Well, since dumb rgb, may connecting a rgb dmx controller to the lights. I don't have a 5v contoller at the moment.

Sent from my SM-G930P using Tapatalk


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago

I wound up with some too, too late to return.

So there are 8 strands of 8 dumb 5050 RGB lights each, with 24 transistors and an encapsulted CPU on the PCB. Alas,there is a front side and a back side to the balls, illumination wise.
You can get a little more visual variety by wrapping the strands in spirals (helixes?), so the same-colored balls are less visually prominent.

Looks too hard to make use of the on board transistors, so new transistors drivers would be needed. Probably 160 mA each (20 ma* 8).

I wonder if 3 x ULN2803A would work? There might be too much voltage drop from a darlington circuit.

Is is worthwhile taking control of it?


Reply
Page 8 / 13
Share: