Thank you for the feedback. I will take a look at everything everyone has suggested.
Sent from my iPhone using Tapatalk
Bwinter wrote:Here's my (first year) interpretation at this song (based off someone else's version I liked):
What did you use to make your mini trees? I've got 15 14" tall incandescent ones that I want to convert this year and want to build a few taller ones as well.
Sent from my SM-G930T using Tapatalk
Here is my version. I looked at the video and listened to the words and tried to represent and extend those on the lights. The video on the tree looks quite a bit better in person than it does in the drone video.
Wolfie,
Just for information - what are the specs on your tree?
algerdes wrote:Wolfie,
Just for information - what are the specs on your tree?
24 strand by 60px per strand, 180. 12v square pixels from Todd in boscoyo strips. HC star with 35 pixels (3 led nodes) arranged in 3 concentric rings. Driven by F16, 3 outputs. 8 Strands per output. Each group of 8 is powered by a single 360w 12v PSU with power coming in at 2 points only (between S2 and S3 and between S6 and S7). 3D printed MISR clips at the bottom of each strand. Bungies holding strips to 8' diameter hoop. 18' (approx) ASAP pole. Base is a modified Portable Hole II chained to 4' rebar stakes.
The power injection logic is outlined here:
http://www.wolfiesden.com/diylighting/power-injection-101/
Here is a photo set with various photos of the tree:
http://www.ipernity.com/doc/wolfie/album/951012

