I am working on my very first matrix. My matrix is 1152 pixels, 24 pixels by 48 pixels with two inch spacing. I am running into a problem with the direction of the matrix I want the effect or image to be. I have look all over on forums to get my answer with no luck. I have changed all the settings I can think of. So right now to give you an idea of whats going on I am working with the FIRE effect. The fire effect flame is running in the wrong direction (like portrait way instead of a landscape way). I attached a picture of the xlights and the board I use E682. Any help will be greatly appreciated. Thank you for your time.
It looks like one of your issues is that you overlap in your universe settings. Your first group ends at Universe 3 channel 132. Your Second group starts at Universe 3 Channel 1. It should start at Universe 3 Channel 133. Likewise the next group also needs revision to eliminate the overlap. Also, you don'the say how the pixels are arranged in the matrix. Does each string go up then down or do they go across then back or what? Could also have some set up issues with pixel orientation.
Hello, I offer you welcome, but I am also fairly new here as well. I do have one automated Christmas under my belt already and I have used the E682. I've only played with X-Lights, so I'm not 100% with that part, but the E682 settings don't look right for a 24x48 matrix. I assume that the only thing connected to the E682 controller is the matrix.
The first thing we would need to know is how many physical pixel strings are you using? And how many pixels per string? Also, how is the matrix wired? Does one string start in the lower left and run horizontally to the right and then go up one row and run back to the left?
If it is 12 strings with 96 lights per string as the X-Lights model shows and the strings run horizontally, this is how I would set up the E682:
For 1-1 to 1-4 Outputs in use 4, Pixel Length 96, Group Size 1, Start Universe 1, Start Channel 1, End Universe 3, End Channel 132, Zigzag Every 48
For 2-1 to 2-4 Outputs in use 4, Pixel Length 96, Group Size 1, Start Universe 3, Start Channel 133, End Universe 5, End Channel 264, Zigzag Every 48
For 3-1 to 3-4 Outputs in use 4, Pixel Length 96, Group Size 1, Start Universe 5, Start Channel 265, End Universe 7, End Channel 396, Zigzag Every 48
For 1152 Pixels you will need 3456 channels (3 channels for each pixel, which is 1 channel for each pixel color R,G,B). With a universe size of 510, which you defined in X-Lights, that would be 6 universes of 510 (6 x 510 = 3060) plus 396 channels in universe 7. You need 7 universes for your 24 x 48 matrix. The Zigzag of 48 means 48 pixels across in one row, then 48 pixels back in the next row, and so on. If you built the matrix vertically it would be zigzag every 24.
What I don't know about X-Lights is does it zigzag a matrix or does it strictly run it Right to Left for the first row and then Right to Left for the next row up, with a starting location of Bottom Right as defined in TeaBa99er's model?
I know that Vixen does not zigzag for a pixel tree without some work in the display setup.
Also, how does X-Lights know that the matrix is 24 x 48? Based on the layout info, is this a 12 x 96 matrix?



