Ok, Thank you Ezellner for your reply. I will start with changing my channel like you said and I am running my pixels with each string going up and down. We are using 96 nodes per string going 24 up and 24 down and 48 across back and forth so I am using each string of 96 on one output on the E682. Thanks
Thank you Callender for your reply. My first string starts bottom right and runs vertical (up and down) snakes back to the left. Each strand of 96 goes to one output (12 outputs total). Yes the only thing connected to the E682 is the Matrix. I made the changes you suggested and I seen a difference because of the zigzag of 48. When the lights are going horizontal (from left or from right as in a portrait view) it looks good but when i change it to go (landscaped view) it is as if the board has two layers of flames, one on top and one on bottom. I'm not sure with whats going on with that now.
Can you post a picture of the actual matrix when it is lit with the fire effect. Can you also have x-lights give it 3 or 4 horizontal bars of different colors and post that picture?
I think that x-lights thinks that your matrix in 12 pixels tall and 96 wide. Again, I'm not 100% with x-lights configurations (and I'm at work now and can't play with it), but I think that this would give you 2 layers of flames.
When the lights go from left to right, is the fire on every other row?
Okay, (don't ask me how, but) I accessed my home PC and setup a matrix in x-lights. I think that you want the setting to be:
Direction: Vertical
# Strings: 48
Nodes/String: 24
Strands/String: 1
Staring Location: Bottom Right
Start Channel: 1
On the E682 you would want the zigzag to be 24 for all of the outputs


