Need help with Matr...
 
Notifications
Clear all

Need help with Matrix using E682

16 Posts
4 Users
0 Reactions
5,108 Views
Posts: 7
Topic starter
(@teaba99er)
Active Member
Joined: 10 years ago

Thank you so much , never thought about setting it up in this order, but it makes since. So I will try this and get back with the results


Reply
Posts: 28
(@callender)
Eminent Member
Joined: 10 years ago

I don't think that x-lights cares about the physical strings of pixels. I think that if you actually had 48 strings with 24 pixels or nodes per string then then the terms would be accurate, but nobody does it that way. (Too many wires and controller outputs used.)
Nodes/string are how many pixels in a row before the next line and # strings are the number of lines. Each line starting from the same end.
For a vertical line direction, Nodes/string is the height and # strings is the width. I don't know how strands/string plays into it. Maybe x-lights would create a zigzag. I don't know, but I do know how to zigzag in the E682, and 24 would be the number for the way you are wired with the strands/string set at 1 in x-lights.


Reply
Posts: 7
Topic starter
(@teaba99er)
Active Member
Joined: 10 years ago

Got it working with what you told me. Just wanted to tell you thank you again Callender . Looks awesome!

fire
circle

Reply
Posts: 28
(@callender)
Eminent Member
Joined: 10 years ago

Awesome. Looks great. I wish this I had a matrix that big. Maybe for for 2018 or 2019.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I didn't really read all that but one point of clarification is for an xLights model like a matrix zig-zag is an optional setting called "Strands per String". If you told xLights you had 1 string of 100 lights with 4 strands per string then you get 4 strings of 25 in a zig-zag pattern. If you wanted the same without zig-zag then would tell it you have 4 strings of 25 lights. You can always right-click a model and view the node layout to see what you got.


Reply
Page 3 / 4
Share: