Raspberry Pi XLight...
 
Notifications
Clear all

Raspberry Pi XLights Set Up

34 Posts
14 Users
0 Reactions
39.9 K Views
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago

Thanks for the links I already have


Reply
Posts: 339
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago
Electrified3 wrote:I don't want to mess up my first try at this.:

Don't worry about messing it up - I went through the directions and got it working in an evening just trying... failing... and trying again. I hadn't use xLights and did all my sequencing in HLS. You shouldn't be able to break anything.

There's a lot of steps so tough to give you an abridged version... I'm not sure what you currently use for your sequences which will affect what you need to do to get your sequences up and running on the FPP. Since you mentioned Noobs was pre-loaded on the SD I will mention you need to download the FPP version of Noobs and use that instead ( http://falconchristmas.com/forum/index.php/topic,240.0.html )

Some things I missed and had to learn, hope they help:
You need your USB stick installed when booting the FPP Noobs the first time
When you transfer over your sequences, you also need to separately transfer over your music. My lights didn't sequence without the music
While FPP and xLights are different, get it working in xLights - then mimic that on to the Pi.

I couldn't get through all the videos on the site myself - 10 minutes to show you how to format an SD card is a bit much... 🙂


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Wow I really like this setup. I viewed the whole tutorial. One question I have is how do you have your Pi on a separate network and still have internet, which it needs to maintain it's clock.


Reply
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago

Chris, if you don't boot with the USB do you need to clear it and start over?

I have it running but can't get my web server up, I can SSH to it, shows up in my router DHCP table but can't remote access it


Reply
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago

Scoot, there is a clock add on now


Reply
Page 2 / 7
Share: