Thanks Chris, that was it.
I had everything going but didn't plug in the flash drive before I booted it. Re-formatted, re-loaded FPP, plugged in USB Flash, let it run, after about 10 minutes rebooted and BAM, there it is.
This is going to make life so much easier!! I noticed when I brought over a converted sequence that it didn't bring E1.31 setup over, I am assuming this is normal to configure the network setup in FPP independant of sequences. Was very simple anyway.
It all seems complicated until you complete all the steps the first time.
Then you have a well duhhh moment.
Joel
you can run your raspberry pi 3 ways
1) Hardwired to your network. This is how mine is connected
2) Wireless to your network using a $20 wireless usb card
3) Not connected to any network. In order for the scheduler to work you will need to buy a $15 board, the rasclock. Now when the pi boots it asks this little board what is date and time and it gets set.
This shows what a rasclock looks like and how you set it up
http://afterthoughtsoftware.com/products/rasclock
Again, i am using (1). I have very high speed to my pi. I can upload a 100mbyte fseq file in less than 30 seconds. You can upload songs while your pi is playing your show.
other items to note. The pi has 1080p hdmi and composite ntsc video out. I used my pi to play mp4 movies for my halloween and christmas shows.
i controlled my show through my ipad or iphone by using the safari browser and just typing in the web address of my pi. in my case that number was 10.0.0.8 as the web address.
Dave is now adding an option that you can have a 2x16 lcd display attached to your pi.
http://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
why? , This allows you to start and stop your show using the push buttons on this display. So you could use your pi to run a show that is on a boat, in a parade, on a horse. In other words you dont need a browser to run the pi if you add this display.
what is next? Dave is talking about master/slave pi's for this year with wireless connectivity. we will wait and see if they achieve that. They are also looking to offer the pi player code for a beagle black computer besides teh raspberry pi/.
it is nice to see dave pitts, mykroft, capt murdock and materdaddy continuing to make a show computer that scales so well. my 24,000 channels played with no lag this year, i am expecting i will be 32-48K channels for 2014.
dave; keep working .....
Electrified3 wrote:Thanks Chris, that was it.I had everything going but didn't plug in the flash drive before I booted it. Re-formatted, re-loaded FPP, plugged in USB Flash, let it run, after about 10 minutes rebooted and BAM, there it is.
This is going to make life so much easier!! I noticed when I brought over a converted sequence that it didn't bring E1.31 setup over, I am assuming this is normal to configure the network setup in FPP independant of sequences. Was very simple anyway.
Glad you got it working! Same as you I had to reformat the SD and re-install because I didn't have the flash drive plugged in the first go around. I also had to configure the E1.31 setup on the pi vs a transfer from xLights so I think that's normal...
Now I'm trying to decide if I should buy another pi while they are on sale at MicroCenter to use for video surveilance of the show! So cool...
If any of you are getting a pi to play your christmas show, you can use the raspberry pi to also stream video to your tv.
here is a description everything you would need to have netflix, hulu and such streaming to your tv
http://mymediaexperience.com/raspberry-pi-xbmc-with-raspbmc/

