Multiple Matrixes w...
 
Notifications
Clear all

Multiple Matrixes with xLights

8 Posts
3 Users
1 Reactions
4,607 Views
Posts: 427
 munu
Topic starter
(@munu)
Honorable Member
Joined: 6 years ago
[#58230]

I am going to get 10 matrixes each being the size of 20 pixels by 20 pixels, i.e. a total of 4,000 pixels. They will be arranged 5 matrixes wide and 2 matrixes high. I did a 4 wide by 2 high matrix display with P5 panels before but that was with a BBB. In this case, I plan to use an F48 with 3 differential controllers to accommodate the 10 matrixes (4 ports per differential board). I am not quite sure how to configure this in xLights, though. I think I found the right section in the manual (see link below) but it's still not quite clear how to do this. I didn't get the matrixes yet but I believe the LEDs for each matrix are arranged like this:

1, 2, 3, ... 20
21, 22, 23, ... 40
...
381, 382, 383, ... 400

Then I have 5 of them horizontally and 2 along the vertical, so

M1, M2, M3, M4, M5
M6, M7, M8, M9, M10

Each of the M1, M2, etc will have the above pattern of 400 LEDs. I played around with the #Strings, Nodes/String, Strands/String parameters but nothing really worked. Do I have to create 10 items and stitch them together? But then how does xLight now they belong together, for instance to scroll text, animate things along all 10 matrixes, etc. Any input is appreciated. If you have a link to a tutorial that would be great, too.

https://manual.xlights.org/xlights/chapters/chapter-four-tabs/models/matrix-model


7 Replies
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

I would start with the easy way which is to define one and then copy/paste the rest. That way you can easily drag them in the visualizer to how you are going to plug them in to your controllers. In layout, assign them in order and wiggle them into position to make one big one. Then make a group and put them all in there. Try some effects on the group and see if you can get them to work.


Reply
Posts: 427
 munu
Topic starter
(@munu)
Honorable Member
Joined: 6 years ago

Ok, so I defined 10 matrixes each having 400 LEDs and then arranged them from top left to top right and then bottom left to bottom right. I believe each of those are considered one string of 400 LEDs and they zig-zag around from top left to top right, top+1 left to top+1 right, etc. Not sure, though. Correct me if I am wrong and/or if I entered the mode incorrectly with those assumptions.

My biggest question is, how do I make those 10 individual matrixes one big matrix? With the BBB I could just define #Strings=64, Nodes/String=128 and Strands/String=1. So all P5 panels together are defined as one big display. But in this case I have 10 individual matrixes that build one bigger display. I am not quite sure how to tell xLight this.

GarageMatrix1

Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

You are on the right track. If you want them to be one matrix, you need to micro-precisely align them as one grid. You can line them up precisely by Ctrl clicking the two left panels (starting with whichever is better lined up) and then right click , find Align and select Align left. Then select the top five and using the same technique but choose Align top. Now you have to make the picture big (mouse roller button with alt to drag the preview around) and nudge each model as close as possible to the ones next to it maintaining the alignment. Get all ten so they look like one. It can fiddly but you will eventually get it. Most of the stuff can be undone by pressing CtrlZ. So, if you make a big error, Ctrl Z.

At any point, make a group out of them. Select them by left press and hold and drag until you have all ten. Right click, Create Group. Give it a name (Garage matrix).

Use the group to do effects and see if they look right for what you want


Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

About the wiring pattern. It really depends on how you hang them. I think you would hang them from the "power buss" side. In which case, you would use vertical direction but you can decide that later. Changing the direction or start location is very easy once you have the physical strings in hand and decide how they are easiest to hang to achieve the look you want.


Reply
Page 1 / 2
Share: