Mega Tree string # ...
 
Notifications
Clear all

Mega Tree string # and degrees

29 Posts
10 Users
0 Reactions
11.2 K Views
Xenia
Posts: 1358
(@xenia)
Noble Member
Joined: 15 years ago

Santacarl,

Because I am only doing a 12 ft. tree, I am going to try using vinyl J channel from Lowe's. It is 7/8" by 1" and 150 inches long. I will drill .6875 holes every 4". The plan is that the lenses on the GECE's pop off and then can be snapped back on through the hole, no glue or zip ties needed. The j-channel I need won't be available until 1/24 to get a section to prove my plan will work.

http://www.lowes.com/pd_423583-271-40024101_0__?storeNumber=2603&Ntt=vinyl+j+channel&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%4026702670%5D&pl=1&productId=3825831&ipTrail=108.248.21.117&currentURL=%3FNtt%3Dvinyl%2Bj%2Bchannel


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

X......IC....should be interesting...I thought about using 'pipe' on my current 20 foot tree....but I just didn't want to deal with the storage issues once I dismantled the tree..... You shouldn't have as much to squirrel away....so that makes it a possibly good option I should think....

Xenia wrote:Santacarl,

Because I am only doing a 12 ft. tree, I am going to try using vinyl J channel from Lowe's.


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago
Xenia wrote:Santacarl,

Because I am only doing a 12 ft. tree, I am going to try using vinyl J channel from Lowe's. It is 7/8" by 1" and 150 inches long. I will drill .6875 holes every 4". The plan is that the lenses on the GECE's pop off and then can be snapped back on through the hole, no glue or zip ties needed. The j-channel I need won't be available until 1/24 to get a section to prove my plan will work.

http://www.lowes.com/pd_423583-271-40024101_0__?storeNumber=2603&Ntt=vinyl+j+channel&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%4026702670%5D&pl=1&productId=3825831&ipTrail=108.248.21.117&currentURL=%3FNtt%3Dvinyl%2Bj%2Bchannel

I made yard borders. I followed the instructions that rich posted here.

I got 16' split rail fencing. Ran it through my table saw. Now I had two 16' lengths. Drilled holes, glued c9's on them, put 1804 rgb node into each. I was thinking I could have used them for making a tree.

Sent from my iPad using Tapatalk HD


Reply
THurrle
Posts: 1211
(@thurrle)
Noble Member
Joined: 17 years ago

Sean,
What is the spacing between the eye bolts at the top of your tree? Also the spacing at the bottom of each string?
Thanks
Terry


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

eyebolts were maybe 1 1/2" between the outer ring. maybe 3/4" spacing back to the inner ring. the topper is 12" in diameter, i could put 36 eyebolts around it. it was dense and small, that was the goal.


Reply
Page 4 / 6
Share: