smeighan wrote:eyebolts were maybe 1 1/2" between the outer ring. maybe 3/4" spacing back to the inner ring. the topper is 12" in diameter, i could put 36 eyebolts around it. it was dense and small, that was the goal.
Thanks Sean. What was the spacing at the bottom? 6 inches or so?
THurrle wrote:Thanks Sean. What was the spacing at the bottom? 6 inches or so?
nope, more like a foot.
lets see the radius at the bottom was 8' so pi*diameter = 48' and i had a 200 degree tree with 20 segments, yep a little over 1 ft.
I've used these J channels around my windows. I don't believe that it will be ridged enough for the weight of the GECE pixels.. Just my 2 cents.
Xenia wrote:Santacarl,Because I am only doing a 12 ft. tree, I am going to try using vinyl J channel from Lowe's. It is 7/8" by 1" and 150 inches long. I will drill .6875 holes every 4". The plan is that the lenses on the GECE's pop off and then can be snapped back on through the hole, no glue or zip ties needed. The j-channel I need won't be available until 1/24 to get a section to prove my plan will work.
Kayjay,
You may be right but most J Channel is 5/8 this is heavier at 7/8 by 1, but that is why I mentioned that I was waiting so I could get a piece in to test. Another option I have considered is using aircraft cable to aid in supporting the j-channel.
here are the yard borders i made per these instructions. http://falconchristmas.com/forum/index.php/topic,67.0.html
16' split rail pvc fencing from home depot split in half on my table saw.
they seemed very stiff. i can hold one end and it doesnt sag in any way.
maybe it might be used for the sides of a megatree?
sean

