Xenia wrote: I am going to attach two string poles together
What do you use for the "poles" part of that?
I recommend looking up one of Sean Meighan's "how to" videos. He built a 180 deg tree and he wanted tight spacing at top so he staggered the connection points on two different radii, if that makes sense. That might work for you. I posted the URL for the youtube video. Just a thought. This is a GREAT post. I am getting my head around my first pixel MT also and greatly appreciate the initial post & the responses!!!
This was my first year and I jumped right into a Pixel MegaTree. I used 16 4meter flex strings attached to EMT conduit, the center pole was Galvanized Rigid conduit. The planned layout was a 180 degree tree, but turned out to be 190 or 200 degree, I used the 180degree model in XL/NC. The bottom diameter was 10' and spacing was 16" apart.
The base of my center pole is based off of Walter Monkhouse's design for the Portable Hole II, the topper and pixels supports are based off of Sean Meighan's tree setup. Used cut sections of T-post secure the center pole and to create anchors for the 1/2" EMT with bungee cord.
The flex strip is 4m waterproof LED digital strip by tube (DC12V input),without controller,10pcs TM1809IC/m,30pcs 5050 RGB LED/m;DC12V input from Ray Wu.
I plan on taking more pictures after I take the tree down.
Steve
In nutcracker what we generate for 90,180,270,360 degree trees is identical.
Here is a secret about nutcracker.
Every single effect is actually created against a rectangle. If you have 8 arches of 50 pixels, we create effects against a 8x50 rectangle.
Single strand of 100 pixels, we generate against 1x100 rectangle
Megatree, horiz matrix, vertical matrix. All would use the same rectangle.
The only place whee we use the "display as" values is when we draw the preview.
What this means is we do not try to match spacing. In nutcracker 2 I prompted for height, width, spacing of pixels vertically, spacing of strands at bottom, how high off the ground. All of these so I could draw the preview very accurately.
A simplifying assumption was the preview just needs to be close for you to get an idea what it will look like,
This , create an effect on a rectangle, is why every effect scales across all models and between users.
So just pick a display as that is close, it does NOT effect the actual generated effect.
Thanks
Sean
Sent from my iPad using Tapatalk HD
smeighan wrote:So just pick a display as that is close, it does NOT effect the actual generated effect.
Thanks Sean....that is good to know....
I'm about to start playing with the MT....and I have another question.....in that regard
I used XL/NC last year to generate effects with pixels on my house eves.....exported them and used them in HLS.....but they we just flashes and pretty patterns of color.
Now that I've learned some of the basics on pixels I would like to get more refined in my effects.....and to me that entails the addition of effects that mirror the beat in the music (my pixel effects didn't do that last year). In that light I have a couple of questions:
1. Does XL/NC allow you to adjust the effects using the music? I've seen some posts about projects and songs so I'm assuming it's possible.....
2. Is there a tutorial out there some place covering this? While I've seen several videos out there....it's all a bit overwhelming to a relative newby..... Any suggestions as to a logical viewing order of videos that will work me up to speed would be wonderful.....
Thanks
SC

