Inserting new unive...
 
Notifications
Clear all

Inserting new universes

5 Posts
2 Users
0 Reactions
6,026 Views
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
[#50580]

I had one big mess on my show computer and another super member spent a lot of time helping me clean it up.
We deleted everything on the first 18 universes, then started my LOR channels on universe 19 and the rest of my pixels on the following numbers. I thought he said that LOR must be first but I'm not sure and I wore out my welcome and don't want to bother him anymore.
My question is, I will be adding a small RGB mega tree and RGB arches, can I start them on universe 1 or should I add the universes at the end of what I already have.
Thank you
John


4 Replies
Posts: 485
(@jerry-rigs)
Honorable Member
Joined: 11 years ago

Thh short answer is that you can add them at either location.

The biggest thing is to understand your channel mapping. That requires that you know what universe/channel each device is listening to and that is determined by how your devices are physically attached and configured.

I'm not aware of LOR having to be first. I want to say you can organize your universes any way you want. I hesitate because I don't know what your layout looks like and I am a little scared of what "one big mess" means.

Since you are talking universes, I assume you are talking DMX. LOR speaks DMX natively and uses the LOR Device ID as the DMX starting channel (that can make them a little less flexible, IMO).


Reply
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
Jerry-Rigs wrote:Thh short answer is that you can add them at either location.

The biggest thing is to understand your channel mapping. That requires that you know what universe/channel each device is listening to and that is determined by how your devices are physically attached and configured.

I'm not aware of LOR having to be first. I want to say you can organize your universes any way you want. I hesitate because I don't know what your layout looks like and I am a little scared of what "one big mess" means.

Since you are talking universes, I assume you are talking DMX. LOR speaks DMX natively and uses the LOR Device ID as the DMX starting channel (that can make them a little less flexible, IMO).

LOR is the first universe used, which is 19 which is DMX. Every thing is run in DMX. I want to use the open numbers 1 to 6. for new RGB. If I put the new universe a the end they will have 3 numbers 174 and above because I have a 144 universe P-10 panel.
Thanks for the reply
John


Reply
Posts: 485
(@jerry-rigs)
Honorable Member
Joined: 11 years ago

If you deleted everything on the first 18 universes, then universes 1-6 should be available.


Reply
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
Jerry-Rigs wrote:If you deleted everything on the first 18 universes, then universes 1-6 should be available.

Ok, thank you. I will use them then.
John


Reply
Share: