Quick question abou...
 
Notifications
Clear all

Quick question about Renard

52 Posts
6 Users
0 Reactions
41.8 K Views
Posts: 55
Topic starter
(@cjrobin27)
Trusted Member
Joined: 8 years ago
[#50566]

I’m new to all this. I bought a used Renard SS24 that is setup with the DMX firmware. Would I set this up as a Renard controller in Xlights or as a Renard?


51 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Renard is an overloaded term. The renard line of controllers can be configured to run many protocols. two of the more popular are the renard protocol and the dmx protocol. the show player only cares about which protocol you are using. you need to configure xlights to use dmx and then you need to get a usb2dmx dongle. those cost more than the usb to rs485 generic dongles that the renard protocol uses. i suggest reflashing the pic on your renard controller to use the renard protocol. your life will be simpler.


Reply
Posts: 55
Topic starter
(@cjrobin27)
Trusted Member
Joined: 8 years ago
MartinMueller2003 wrote:Renard is an overloaded term. The renard line of controllers can be configured to run many protocols. two of the more popular are the renard protocol and the dmx protocol. the show player only cares about which protocol you are using. you need to configure xlights to use dmx and then you need to get a usb2dmx dongle. those cost more than the usb to rs485 generic dongles that the renard protocol uses. i suggest reflashing the pic on your renard controller to use the renard protocol. your life will be simpler.

Thanks for the response Martin! Last year was my first year adding pixels to my display.... 4 leaping arches driven by an aphapix4. Previously I had all static led string lights. I want to do a little something with all the led string lights so I decided to add a renard to the mix. This year I plan on adding a house outline and maybe a few other props driven by a falcon.

So if I wanted to connect the Renard straight to my laptop to familiarize myself right now, my best and easiest option would be to buy a usb2rs485 dongle and re-flash the renard, correct? I've never flashed a controller before. I know I need a programmer to do this but is it something that's complicated?

Eventually, I would like to have the renard connected through the falcon so is that just a matter of plugging the renard into the falcon and setting up the falcon to see the renard?


Reply
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago

The Sticky folders here are a good read. Wayne J has some very good videos for flashing pics. It is a pretty straight forward process, especially if you do not need to make changes to the firmware (.asm file) and use the hex file provided.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

This is how to flash PICs...easy peasy! 🙂

http://doityourselfchristmas.com/forums/showthread.php?18186-PIC-programming-using-MPLAB-MPASMWIN-software


Reply
Page 1 / 11
Share: