How Do I?
 
Notifications
Clear all

How Do I?

10 Posts
3 Users
0 Reactions
4,134 Views
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

I got it figured out except theres one problem.
I have to make a 56 long node strand - I believe i can add 6 more nodes - http://doityourselfchristmas.com/forums/showthread.php?45598-Can-you-splice-ws2811-node-strings-together&highlight=cutting+pixels+strings .

Made a model 56 nodes long and labeled the last sub model 43-56.
When testing 43-56 do not light up.

But if I make the last sub model 43-50 those light up but not the last 6 nodes.
Whats wrong with my setup and thinking?

x

Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

How many pixels does your controller setup say there is on that output ... controllers commonly default to 50


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

I am using ESPixelSticks...not knowing what I am doing... I made two strings with 50 nodes per strand and things worked.
Sometimes just playing around you get lucky.

It was a good learning day - I learned about sub models too.


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
keithsw1111 wrote:I am not sure what outcome you are trying to achieve. Maybe you should start with that because almost no one does anything at the node level unless they are working with something like a moving head device.

Sent from my iPhone using Tapatalk

I used the node level to do 8 segment AC string arches. After learning to do a metronome timing, it works out very well to make ramping/chasing segments. I'm not well versed in all what xlights can do and I cannot say if I have done that correctly, but it is working for me.

Chasing AC string arch

Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

Node level sequencing works ... it’s just that most things can be done more quickly and easily at the model level.

But if it works for you ... all good.

Sent from my iPhone using Tapatalk


Reply
Page 2 / 2
Share: