Matrix Help (zig za...
 
Notifications
Clear all

Matrix Help (zig zag)

5 Posts
2 Users
0 Reactions
2,796 Views
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago
[#49382]

I have a matrix setup in XLights using an F16v2. Unfortunately it isn't displaying effects properly and one side is flipped/reversed. I've read about zig zagging but don't fully understand what i need to do. My matrix is 30 rows of 35 pixels starting at the bottom left (1050 pixels total) across 2 ports (680 on one, then 370 on the other). In XLights i have the model setup as follows:

Direction - Horizontal
# Strings - 30
Nodes/String - 35
Strands/String - 1
Starting Location - Bottom Left

Any clue as to why it wouldn't be displaying properly?


4 Replies
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago

I got it. Set it to the following:
# Strings - 1
Nodes/String - 1050
Strands/String - 30


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

Did you try setting zig cnt to 35 on the Falcon under the port configuration for the outputs?


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago

Actually it doesn't work as expected. it looks right in xlights but not on the actual matrix. i have not done anything on the falcon. i thought i just had to do it one place?


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago

Disregard. i got it by just making the changes to xlights. forgot to upload sequence.


Reply
Share: