Error in Channel al...
 
Notifications
Clear all

Error in Channel allocation

15 Posts
3 Users
0 Reactions
4,194 Views
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

Am trying that but am still getting invalid on my p10 panels,
Currently it is saying I only have enough channels for 54000(approx ,not at computer)
But it says I need something around 76000 channels to be setup
I had setup done from 1-192 and 510 , then changed channel count to suit
each universe (as DR N) , then deleted output/universes I didn't use.
Is it still thinking I need the full count and all 192 universes?
Cheers Boof63
PS have purchased Pi2 so would like to convert my HlS across to fseq !!!


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

If it says "Invalid" then your trying to type in an output number higher than the number of outputs you setup. One key phrase in your reply is "then deleted output/universes I didn't use". You can't do that and expect your "From Output" numbers to stay the same. Read what I posted earlier cause that's your issue. Universe number DOES NOT necessarily equal output number.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

Since your having trouble with using "From Outputs" I recommend you just change all your from outputs to "1" and then type in the absolute channel number offsets that you can find on the setup tab for each universe.


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

I agree with Gil, set all outputs to one.
Here is a quick peek of my model for my 3X2 P10 sign:

model

And here is a quick look at my layout page, all models are off output 1. You can see it is all sequential, +1 channel from end of element is start of next element.

channel setup
model

Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

OK . have setup spreadsheet from HLS csv file. Have used Gil's formula? to determine channel count.
It was setup as HLS x universe order. Listing worked well except for custom models, I get channel overlap on some (Not all elements)
Resorted by channel count and overlap errors are more obvious.
Have deleted "faulty" element and reinstated- same problem, the custom model appears to be counting more channels than drawn.
Hence has extra channels allocated which throws out the overlap errors when ticked on the box.
Any ideas (yes have checked the maths lots etc, deleted offending elements ,make a copy of working element version,)
Solutions greatly appreciated
Cheers Boof63

It Was all my end , wrong order, missing some elements totals from initial spreadsheet, and incorrect numbering on custom items
Cheers and thanks for those you viewed and though idiot!! you were right ;(

PPS why does my P10 panels ply right side up in XL4 and when i imp[ort back to HLS they are rotated 90 degrees CCW, bottom becomes right hand side
Have tried starting point in different corners (HMax, Vmax ) but using custom layout i don't have this option to try , Ideas please?


Reply
Page 2 / 2
Share: