E131 question
 
Notifications
Clear all

E131 question

2 Posts
2 Users
0 Reactions
1,452 Views
Posts: 33
Topic starter
(@dkuntz)
Trusted Member
Joined: 19 years ago
[#26580]

Is there any way to pick the interface for the multicast option? I think Nutcracker is sending on both the wired and wireless interfaces on my
show computer. The traffic is overwhelming my wireless router. The IP addressing scheme of my E131 devices and the wired connection on my show
computer keep the E131 traffic off my home wired and wireless connections as long as the E131 traffic does not go to the wireless
adapter. I tested this earlier in the year with Vixen running files exported from Nutcracker 2. What I like to do is remote to my show
machine from my laptop to do testing. This is done via the wireless interface.


1 Reply
Posts: 213
(@aaron1)
Estimable Member
Joined: 16 years ago

There's no way (that I know of) to tell xlights which IP address to use for transmitting your e1.31 traffic. I had a similar issue recently. I'll add a link to the thread where I figured it out. If you're using multicast, you'll likely want to add a route to your Windows routing table to send the multicast traffic out the port to your controller and not out on your wifi.

Edit: Here's the thread... http://doityourselfchristmas.com/forums/showthread.php?27620-e1-31-bogging-down-wireless


Reply
Share: