I created a custom 31 node model in the layout. If I test it through tools, all the nodes come on. If I apply an effect in sequencing, it skips the final 6 nodes, and the node before those six is usually a different color. It's pretty much the same with all the effects, even if I select a solid color. Any ideas? Thanks
Things that can affect that:
1) Start channel needs to be set correctly for the model
2) The numbers in the custom model should start at 1 and go from 1 through 31.
3) The controller needs to be configured so the correct data goes out to the model matching the start channel set in xLights.
Gil,
I will check those items again, when I get home. I have an SS16 before that item in the channel order, so I'm starting the model with channel 17 on the same universe. So, the model occupies channels 17 through 109. I was just getting confused since the Tools -> Test worked and lit up all the nodes. Maybe I should just move the model to a separate universe and test that.
Thanks for the reply.
So as long as you numbered the custom model starting at 1 and not 17 and used 17 for the start channel everything should work fine. To be more precise use the universe channel notation for the start channel. So if it's universe 2 channel 17 type in "#2:17".
