Can someone please take a look at my layout and see if you notice anything out of order? I have my groups set up but I am confused why under Windows Door all of the individual lines are listed even when the group is not expanded. Is this normal? Logically I would think you would only see the individual lines when the selected group was expanded to show it's contents. I'm having issues with the Whole House model and certain effects which rotate from the center of the display (fan, etc.). The issue is a couple of the strings on the upper roofline (ridge) are reversed. I've tried going in and changing the starting location for the individual strings but that didn't correct the issue. I'm clearly still in the learning phase and I appreciate anyone advice / guidance.
This is normal for all your elements to be listed under the group that you have expanded. As far as any issues, 1) you are running a very old version, I would upgrade. 2) You have a number of overlapping channels which is more than likely the cause of you not seeing what is expected. You can verify this by running tools -> check sequence. With it being so late in the season though it might be best to leave it alone for now as your audience will never know the difference. I'd been happy though to jump on a zoom meeting and walk you through any questions you have.
Thanks for your insight, I will look into upgrading my version, and also checking my channels. Should I still be able to see all of the individual strings when the group is not expanded? That's what confused me is that the individual strings were not only listed in the groups but listed at the bottom with all groups minimized.
But the Window Door group IS expanded in the photo you posted...
BTW there is no way to ONLY show the groups. When your groups are all collapsed in Layout we are still going to list every model that belongs to that layout view so even if they exist within a group they also exist as individual models. A group is not meant to organize the models on the Layout page its meant to create a new model that can be sequenced.

