Sorry if you have seen this question before. I posted it under the vixen forum, but I decided to try Xlights/Nutcracker out (for other reasons), so I thought I would post it here. I have a simple pumpkin gif and the orange and brown colors which look good in on my computer screen look terrible in my small rgb pixel matrix. The orange effect color wash also looks bad. Is there any easy way to fix it in Xlights? Or is my only option to find the RGB values that make a good orange and brown and then redraw the pumpkin in gif?
You may need to include more info. What kind of rgbs, controllers, etc. It could be as simple as your controller not setup correctly. For example, you may have rgb pixels but your controller is setup for rbg, or setup for wrong pixel type. It's anyone's guess.
For starters, Most pixels I have tried tend to have white in the Cool White color temperature range so they are very hot in the blue and very weak in the red. This color bias tends to make the darker browns, reds, and oranges look bad. To get a correction, an edit of your color pallet with customized colors will make a nice improvement. For example for "White" using an incandescent bulb nearby for reference, I define warm white as about 10% blue, 25% green and 100% red. You would think that setting would be very reddish orange, but next to an incandescent, it looks mostly white. This is because the LED pixels are strong in the blues. This is why many LED strings of multicolor bulbs in the distance look very bluish overall compared to an incandescent string with the same reds, oranges, greens, and blue bulbs. On screen your pallet should look quite red. Who cares as long as it fixes the pixels. Just an FYI, Orange is a hard to get color with RGB. It will always be a little off, even after careful adjusting.
Thanks for the replies! They are WS2811 lights controlled by an E682. From everything I am reading, there isn't anything wrong with my controllers or lights, it's just a common problem and there is not easy software fix. I just need to find better colors. Thanks for the help.
Franchise wrote:Thanks for the replies! They are WS2811 lights controlled by an E682. From everything I am reading, there isn't anything wrong with my controllers or lights, it's just a common problem and there is not easy software fix. I just need to find better colors. Thanks for the help.
I do have an idea on the fictitious To Do list that would fix this. I've wanted to create an effect that is more of an effect modifier that affects every layer below it on the model. It would be like an adjustment layer in Photoshop and be used to modify color balance, hue, brightness, saturation, etc.
