sctwohig wrote: Did you get this working, we are working to configure one and everything works correctly other than the beam appears to be strobing in...
ErnieHorning wrote: A quick moving head setup from Daryl of xLights. Thanks! I had watched videos, but not that one. That gave me some ideas of thin...
ErnieHorning wrote: I don't about moving heads but it might help to know what controller your using. I know it supposed to be pretty easy. Somebody ...
CptDecker wrote: Here is a link for an enclosure build or you can box it pre-built... Thank you. I'm too incompetent to build it myself and to buy ...
MikeKrebs wrote: The haunters sometimes make a cemetery column and put the projector inside the column. The columns can be "locked" into place and the...
Since my first post 5 years ago, I ended up doing projection mapping by buying old used projectors and just putting them out every night and bringing ...
superdave wrote:The usual suspects : Thanks! That's a great FAQ. Any recommendations of anybody on that vendor list?
MartinMueller2003 wrote:Three years ago there were people on this forum complaining about a design change by RW. It was tracked down to the removal of...
MikeKrebs wrote:Glad you said that about the pixel chip changing being BS but SanDevices need the update to V5 to deal with all newer pixels. This is ...
MartinMueller2003 wrote:Thats BS. I just finished removing the last of Ray Wu's recent junk from my show. The pixels flickered and froze at random tim...
blantrip wrote:I changed the timing settings to each option with no change in flickering. But thanks for the suggestion. My issue is freezing, but ...
angus40 wrote:V5 has timing settings so should help . What value should I put in there? Or just play with it?
