New ws2811 chip and...
 
Notifications
Clear all

New ws2811 chip and E682

12 Posts
5 Users
0 Reactions
1,899 Views
Posts: 91
Topic starter
(@franchise)
Estimable Member
Joined: 19 years ago
[#57350]

I had previously made a post that I had an issue with some light strands getting stuck on a color. Everybody I talked to figured it was due to overloading the power supply, which made sense because I was running a lot of lights off of one E682. So I just put together a new E682 and put that on the 600 bulbs that were giving me a problem. They still got stuck! But that got me thinking, these 600 were new ones from Ray. My other ~2000 older bulbs from Ray were all doing fine. So I sent Ray an email. He responded that the Ws2811 chip had some change this year on the timing and I probably need to do a firmware upgrade on the E682. I'm currently running v4 something. Will version 5 help? I sent an email to SanDevices just a little bit ago so I haven't heard back yet.

Anybody else seeing this issue? Any advice?


11 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

V5 has timing settings so should help .


Reply
Posts: 373
(@blantrip)
Reputable Member
Joined: 16 years ago

I changed the timing settings to each option with no change in flickering. But thanks for the suggestion.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Did you save setting and reboot after settings change ?


Reply
Posts: 91
Topic starter
(@franchise)
Estimable Member
Joined: 19 years ago
angus40 wrote:V5 has timing settings so should help .

What value should I put in there? Or just play with it?


Reply
Page 1 / 3
Share: