AC lights changing ...
 
Notifications
Clear all

AC lights changing channel

4 Posts
3 Users
0 Reactions
1,935 Views
Posts: 18
Topic starter
(@mac1321)
Eminent Member
Joined: 6 years ago
[#55049]

I changed one of the channels on my layout and did a render all on my sequences and re-uploaded it to fpp and it's not picking up the channel change. If I go through and just click on each on state in the sequence and upload it then is fine but trying to avoid having to do this for every sequence. It seems if I do a render all after changing the channel and uploading to fpp it should pick up the change?

This is my first year so must be missing something. Everything else so far is working as expected.

Thanks


3 Replies
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago

what kind of "change" did you make?


Reply
Posts: 18
Topic starter
(@mac1321)
Eminent Member
Joined: 6 years ago

All I did was change it from channel 56 to channel 45 on the layout tab. as 56 wasn't working right. These are renard controllers so all single channel.


Reply
Posts: 118
(@pjones)
Estimable Member
Joined: 11 years ago

When I have to change channels on one of my TR24 controllers run by FPP, I first make the adjustment in xLights using the following procedure:
Update the strand properties in xLights to the correct channel assignment, save, open each sequence in xLights one at a time, render the sequence, save the sequence making sure to keep the same file name. Repeat for all sequences in my show. This includes the small transitions and between show stuff that you use as well (if you use them).

Next I log into my FPP and delete all my sequences from the FPP database, then upload all the updated sequences into my FPP database, Restart FPP, test to confirm the new sequences play.

I make sure not to change the names of the files so I don’t need to update the schedules as well. If you keep the same name then it all works the same after the new files are uploaded.

It’s a process, but I don’t know any easier way to do it. My understanding is you need to render and save each sequence individually because that is where the channel information is stored.

Hopefully that helps.


Reply
Share: