2020.06 Controller ...
 
Notifications
Clear all

2020.06 Controller Auto Size.

4 Posts
2 Users
0 Reactions
2,247 Views
Jeff Millard
Posts: 1450
Topic starter
(@jeff-millard)
Noble Member
Joined: 19 years ago
[#52312]

I'm jumping in with both feet here. Having a little trouble understanding what's going on with controller auto size. I have 4 Models I need assigned to the first E682 because of their proximity. With auto size off, I have 750 Icicle nodes in 5 strings of 150 each. Individual Start channel is 1:1 of this controller. Port 1 is set in the controller connection. I also have a Spiral tree with 151 pixels >Icicles 1:1, a Pixel tree with 6 strings of 42 nodes each and a spinner with 1 string of 48 pixels. I click on Visualize and I see ports 1-5 with 150 Icicle pixels on each. Port 6 has 151 for the spiral. 7-12 each have 42 for the Pixel tree. 13 has the 48 for the spinner. Perfect.

Now switch auto size on, this controller ends up with 1 universe and 1 port connected to a single set of 150 Icicles. Everything else gets shifted to the next E682.

I'm creative, but not very smart so I have no idea what is happening. I'm going to go back and watch Keith's release video again, but I didn't see anything in my notes that would point to this happening. I turned auto size off again and it went back to the way it was.

Jeff

alphabetsoup

3 Replies
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

I can't remember for sure, but I believe Keith mentioned in the video that the Auto Size option might cause issues and that option might need tweeking....I just left it off.


Reply
Jeff Millard
Posts: 1450
Topic starter
(@jeff-millard)
Noble Member
Joined: 19 years ago

Thank you. I missed that when I watched the video.

Jeff


Reply
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

They just released .07 and it fixes the auto size option.


Reply
Share: