I thought I'd post some pictures of my medium-sized trees, built with PEX. I thought I'd post these pictures after seeing another person here ask about building mini trees using PEX. I think my design worked out pretty well. I originally tried to build the trees using just the PEX as a frame and that did not work at all. PEX is just too flimsy to use as a base IMHO.
Pictures of my medium-sized PEX trees can be seen here.
The tree measure 44" tall, so I've dubbed them "Medium Trees". I welded the frame using 1/4" rod. The star is this 12" Moravian Star/Tree Topper. I was really happy with the star. A bit expensive perhaps, but easy to put together. In my design I put 18 pixels inside the star. Just squirt some clear silicon inside each point, press the pixel into and then snap it into place. I DID get some water build up insider star last year, so this year I might try to find a way to waterproof it a bit more, or drill some drain holes. It did not affect the pixels in any way.
I tried to take pictures of anything of interest in the trees. Like the PEX plugs I used instead of PEX caps. I found white PEX plugs at Lowes (not pictured but used on my 2nd tree).
The tree is made up of 8 legs (24 pixels each, doubled up so used 4 ports on my controller), a round base (55 pixels) and the star (18 pixels). I think the base circle is the MVP of this design. It really helps sell the shape as a tree and helps you create some fun rotation effects.
You can see the trees in action here.
Happy to answer any questions. -=Steve
Very Nice Steve!
I think they came out great!
Very nice job! Well done!
Beautiful job
Steve thank you very much for the details. Your home is one of the best examples of how to do a small house with a small yard. Lots of effects but not crowded. Wonderful job!
