I have 16 mini trees made with the 24" version. I use three 100 count strings of incans (3 colors). However those trees draw over 20 amps of power if all on so I am converting them to LEDs for the 2012 season. Will only have 70 LEDs of each color, but the test tree I made last December and stuck on the end of the row of trees looked just fine in terms of light density. By contrast all the lights on my roof, windows, porch and my mega tree only draw 2.5 amps when all on (all LEDs)
BillinSoFL wrote:FYI. I found these rather cost effective frames that could be used for mini trees.The two smaller ones are easels ($2.99 and $4.99). The larger one was located around the same section and came in 2 sizes. I want to say 40 and 60" for like $12.99 and $14.99.
Is there any welding done here on these? this looks like a simple design. I have some 1/4" x 20' steel rods and some # 9 galv. wire I plan to make mini trees with.
11Bravo wrote:Is there any welding done here on these? this looks like a simple design. I have some 1/4" x 20' steel rods and some # 9 galv. wire I plan to make mini trees with.
That was the route I took.
BUT... for the price of the store bought ones posted, it would be hard to beat it with the materials and labor tacked on.
I have 20 mini trees all Leds three colors and all are made from tomato cages way to easy and for 50 cents a piece how can you go wrong

