I know I've seen several metal mega tree top plates, but can't find them all again. What are your favorites? I plan to build a 10-12 ft tree. Also, what are your favorite toppers and any other hardware you used to build your mega tree. Just looking for ideas and suggestions. I gotta get started on this! Thanks!
My Topper is a 32 slot Boscoyo sourced topper. I use 16 of the slots for my 360 degree tree. My pole is three PVC pipes inside each other and I use a Ring on the outer pipe to mount guide wires at the 3m level. inner pipes get pulled up by a hand winch to a total of 5.5m. Boscoyo strips from the topper to the ground. Tent stakes to hold the strips in place. On top of it all is a Boscoyo Snowflake.
MartinMueller2003 wrote:My Topper is a 32 slot Boscoyo sourced topper. I use 16 of the slots for my 360 degree tree. My pole is three PVC pipes inside each other and I use a Ring on the outer pipe to mount guide wires at the 3m level. inner pipes get pulled up by a hand winch to a total of 5.5m. Boscoyo strips from the topper to the ground. Tent stakes to hold the strips in place. On top of it all is a Boscoyo Snowflake.
Ok, so you don't use a bottom ring, just stake strips to the ground individually? Do you use bungie/shock cord to keep tension or is your ground level enough that they are all good after winching the pole up?
Glycerine wrote:Ok, so you don't use a bottom ring, just stake strips to the ground individually? Do you use bungie/shock cord to keep tension or is your ground level enough that they are all good after winching the pole up?
8" bungie cords. I could use a ring but never went through the trouble to make things that perfect. To me, you have to have things NOT in perfect alignment or it looks too sterile.
MartinMueller2003 wrote:8" bungie cords. I could use a ring but never went through the trouble to make things that perfect. To me, you have to have things NOT in perfect alignment or it looks too sterile.
Thanks!
