When to use ASAP?
 
Notifications
Clear all

When to use ASAP?

13 Posts
5 Users
0 Reactions
10.5 K Views
Posts: 447
Topic starter
(@glycerine)
Honorable Member
Joined: 7 years ago
[#52692]

At what point, height wise, does it make sense to use an ASAP? If not using an ASAP, how do you keep tension on the strips? Does the weight of the bottom ring do it?
I'm planning to build one for this year and was thinking around 10 ft., maybe 12. Any tips would be appreciated. Just not sure the best way to go as far as the center pole and mounting plate(s).


12 Replies
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago

I found a spot and made my mount. 2’ in the ground or more and cemented it and just put a cap on it when not. In use. Not. Everyone can do this . Just sharing . Had it set up to test with no wires 16 strings by 50 pixels and. Held up for several days thru thunderstorms.


Sent from my iPhone using Tapatalk


Reply
Posts: 447
Topic starter
(@glycerine)
Honorable Member
Joined: 7 years ago

Looks good.


Reply
Posts: 890
(@ben-bobbi)
Noble Member
Joined: 17 years ago

do you have a galvanized pipe in the ground with threaded end up, and use a coupler to connect the ASAP?


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Don't mix up the ASAP and the portable hole. "A Strap And Pulley" is the vertical lifting pole. A portable hole is the weighted base for those who can't (or don't want to) put a permanent hole in their ground. In our case, it is because we move props - including MegaTrees - around each year.

We can stand up trees up to 14 feet tall. What I mean by this is the ability to connect the topper, the mount, and the poles, then literally walk it into position. We use bases (mostly "Big Foot") from ChristmasLightShow.com. One of the legs goes all the way through the base. The other two are cut in half. We disconnect one of the half units (usually the rear), and walk the tree up. Once up, we put the last leg in and lock it down.

With trees over 16 feet tall, or ones with in excess of 16 strands, the ASAP pole makes sense. 32 strands can get pretty heavy. The ASAP lifts it with ease. We have one tree at 26 feet and use an ASAP Sr. (2 stage). I have to admit that by itself the Sr. is pretty hefty, but manageable. Add the strips/strings/lights after it is vertical and then hoist it up.

No matter which you decide, don't under estimate the importance of guy-wires. They can be the difference between enjoying the season, or picking up bent pipes from your display.


Reply
Page 1 / 3
Share: