Who uses Overkill Metal products, specifically the toppers and T hooks? What's your opinion? Good stuff?
I'm looking at using one of these: https://overkill-metal-toppers.ecwid.com/T32x360-FL-J32x360-FL-9-inch-p169895880
along with the T hooks: https://overkill-metal-toppers.ecwid.com/Classic-T-Hook-p170803684
and bottom tabs: https://overkill-metal-toppers.ecwid.com/Classic-Bottom-Tab-p170803689
Also, do you just use zip ties to hold the T hook and bottom tabs to the mounting strip? And can anyone verify that the holes line up with the mounting strip that Ray Wu sells: https://www.aliexpress.com/item/4000340164510.html?gps-id=pcStoreLeaderboard&scm=1007.22922.122102.0&scm_id=1007.22922.122102.0&scm-url=1007.22922.122102.0&pvid=1d77aa08-d5b3-404f-bf72-532c8291b527&spm=a2g0o.store_home.smartLeaderboard_728718009.4000340164510
I have three Overkill Toppers and all with T-hooks. Very well made and I'm fairly happy with the T-hooks. I've never used the J-hooks so I can't really compare. I went with T-hooks because I was worried the J-hooks would allow the strips to wiggle and also the T-hooks allow me to vary the spacing where the J-hooks are permanently attached to the topper in fixed spacing. Not a big deal, but seemed like a slightly nicer solution to me. With that said, the only down-side I have with the T-hooks is when I unpack all the strips from my storage bins (at the beginning of the season) the T-hooks like to snag on the pixel wires. Again, not a huge deal, but a bit of a nuisance that I wasn't expecting.
I zip-tie the hooks to my original boscoyo strips and the holes line up perfectly. Don't know about any other strips but I wouldn't think it would be much different.
I want to add that, like many hobby vendors, this is not his primary business. His primary business takes priority during the week and he tries to keep up with the hobby stuff on the weekends. But with the popularity of his product, that has been hurting his family time and he has had to focus more on the family lately. I highly recommend the product, but don't expect instant response to emails. He's a great guy, but balancing his time and priorities, so be understanding of the environment if you need things in a rush.
Awesome, thanks for the info. I could see those hooks snagging on things...
I was thinking about getting his winch plate too. It says it's for a 1,000 pound winch, but I was planning to get a 600 pound winch. Any idea if the holes would still line up? I assume so, since it looks like those winches are made to mount to a boat trailer, right? I still haven't ordered my pixels, so I'm not in a huge rush. Just hoping to get started fairly soon, since we're already into August.
I love my Overkill Metal Products topper with T-Hooks. I replaced my QT3 from Holiday Coro due to the fact it almost snapped in 2018... My tree is 270 degree with 48 strings so a different topper than you're looking at. Same concept though. I highly recommend it. I used bungee balls secured to my ring at the bottom of the tree. I would'nt recommend any strip except Boscoyo
uncledan wrote:I love my Overkill Metal Products topper with T-Hooks. I replaced my QT3 from Holiday Coro due to the fact it almost snapped in 2018... My tree is 270 degree with 48 strings so a different topper than you're looking at. Same concept though. I highly recommend it. I used bungee balls secured to my ring at the bottom of the tree. I would'nt recommend any strip except Boscoyo
Have you had problems with other strips or do you just really like the quality of Boscoyo's? Also, do you use the "original" with the 3 small holes between each pixel hole or do you use the heavy duty strips? It looks like their original doesn't come on rolls, only in pre-cut lengths.
I was looking at the t hooks for the heavy duty strips and wondering how they don't slip off? ( https://overkill-metal-toppers.ecwid.com/T-Hook-p170715627 )
