Mega tree is basicly complete and have everything in order working great. Need to replace one pixel so I’m Playing with effects like text and video
Question 1-is there a specific format to fit the video within the tree ? Tried the center and fit but always seem to be missing parts of the sides.
Question 2- how to do a countdown , I can do scrolling text stuff but can’t seem to figure out a countdown type set up .
Thanks
Sent from my iPhone using Tapatalk
MikeKrebs wrote:Video is limited to the resolution of your tree so you have two choices. you can use the default video conversion or you can pre process cropping and converting to fit. If you preprocess, at least you will give yourself a chance to get the part of the video you want.Countdown like 10-9-8 etc? or countdown like 6 months to christmas? (OM! it is only 5 months to showtime!) The first can just sequence. The second will depend on your show player.
Thank you mike ...I figured out how to do the countdown I’ll keep researching on processing video .
Sent from my iPhone using Tapatalk
I have tried 3 diff computers for 4 days and Can’t get the mega tree calculator to work , trying to get optimal top plate spacing as I think mine are too close
10’ pole
16x50 with 2” spacing 180 degrees
Right now my top plate holes are .688” center to center on an arch as seen plate is 8” diameter.
Any suggestions on how large I should go ?

Sent from my iPhone using Tapatalk
Just take 16 strings - 2 strings because those will be on the 180 degree line then divide by 180. Or 180 divided by 14= 12.85 degrees. Draw that out, and then find the distance between the lines you want, make a mark and measure the radius. Then x 2 for the diameter. I did mine on Auto cad, I did allow overlapping a bit, but I install them even then odd so I can remove one if needed for service.
