Storage Ideas
 
Notifications
Clear all

Storage Ideas

14 Posts
11 Users
0 Reactions
5,394 Views
IaRoadKill
Posts: 586
(@iaroadkill)
Honorable Member
Joined: 12 years ago
rdj6107 wrote:what topper do you use to hold the strips together??

24 strip 10' topper kit from Boscoyo. It comes with topper, guywires, guywire ring, and bottom disk.

IMG 5064

Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

I just bought some garage storage racks that hang from the ceiling. I will use those for long items that I want to store as "long items" (e.g., pixel strips zip-tied onto PVC EMT). I am going to use 5 gallon buckets for nodes/Boscoyo pixel mounting strips. I will put some of my pixel strips back into the little packages they were delivered in; that works nicely and fits well in the standard plastic storage containers you can buy from WalMart/HD/etc...


Reply
Posts: 150
(@markl)
Estimable Member
Joined: 19 years ago

I too "roll" mine up and lay the rolls flat in a storage bin. Mine are ~13' in length. Two rolled up fit nicely in some bins I bought at HD. I then separate the layers with cardboard scraps to keep things flat.

This was my first year using the Boscoyo strips. Prior to that I used the poly strapping as suggested way back when by Walter Monkhouse. I wasn't careful in storing those, and they developed a twist that made it a real pain to get straight lines coming out of storage. I don't know if the HDPE that Boscoyo uses will develop the same twist, but I'm not taking any chances so I'm careful with the storage.


Reply
Posts: 21
(@fbiff)
Eminent Member
Joined: 13 years ago
MarkL wrote: I then separate the layers with cardboard scraps to keep things flat.

I like that idea a lot, not that I have pixel strips to worry about but that would be a nice idea to remember.


Reply
Page 3 / 3
Share: