So I made my first pixel tree this year. Thanks to everyone's help on this forum, it came out great! It was in the 50s here in Columbus yesterday so I took advantage of it and took down all my lights. Does anyone have any storage tips/creative solutions for storing pixel strips with the pixels still in them?
Sent from my iPhone using Tapatalk
For the pixel/mega-trees we use large storage tubs. The strips are brought down together and easily put into the tubs, making sure we don't crimp them.
For things like firesticks, we simply place them on a shelf. A long shelf (in our case 10'), but a shelf none the less. We do cover the boxes and the stored sticks with a tarp or long cloth - just to keep the dust off and/or out.
When we put them back up, we may have to reload a couple of pixels that came out, but never more than a few.
I bought some storage bins on sale from AtHome for about $15. They are clear base with red translucent tops and are stackable. They are roughly 6' long and about 3' wide and even have wheels on one end for rolling around. My strips are 15' long so I coiled them in thirds and they lay in there nicely and I put the PSU boxes in the center along with the power injection and data feed lines so the tree stuff is all together in a single bin. Next year, I can roll it right out to set it up and will have everything in one place.
I use tubs as well, just coil the strips loosely in a small circle and lay them one on top of the other. The bigger the tub the better. And like Wolfie says you can put other stuff in the center of the circle. This is how I di mine last year and they came out of the tubs just fine for this (2016) years show. I light the idea of hanging them, but I do not have a good place to do that.

