Though this is meant to run as a standalone, I can see controlling it with an on/off channel output too. This way an animated element runs all by itself but you could still turn it on only when it’s needed. Maybe its elements that only run when nothing else is running (i.e. in between sequences or when the show isn’t running).
I’m interested in the code also and am looking at ways to use it.
Doesn't this already exist? I thought there was some hardware that used an SD card to store the sequence info (besides the Helix), does this sound familiar to anyone else?
Not that I don't support new developments mind you, just thought I remembered something like this already.
How about using a fast and reprograming it.
Jrd wrote:Doesn't this already exist? I thought there was some hardware that used an SD card to store the sequence info (besides the Helix), does this sound familiar to anyone else?Not that I don't support new developments mind you, just thought I remembered something like this already.
Here's one on Ray's site that controls 2048 pixels.
Then once you are on Ray's site, us the search words " Controller LED RGB SD " and you will see more (for different pixel types). Not much information for how the SD card is programmed tho ...
Give this a try. I’ve attached both the pic code in this post and I’ll do another post for the Output Plugin.
This is not finished code at this point. I will be doing updates but I think it should work for you at this point.
Currently I have the pic code set up for what I think you want. It’s set up for 16 channels, 100ms, etc.
Here’s how the pic code works. Keep in mind, as I’ve said earlier, this code was set up for something else but I think it might work for you. What the code does is it sends the sequence data out to the next pic and any data coming in to the pic gets displayed on the output. Any extra data coming into the pic gets dropped.
So, the setup might be a little off of what you might expect. For example, to use it in a RenardSS 16 you would program the 1st pic with this code and leave the 2nd pic programmed with the regular firmware. Then attach a network cable directly from the controllers output to the input. This will send the last 8 channels back to pic 1 to be displayed. So, the result is that the 2nd pic will display channels 1-8 and the 1st will display 9-16.
The timing is not exactly 100ms but it is pretty darn close. If better timing is needed then the code would need to be ported to another model of pic with the same pinouts. Another benefit of this would be that we could theoretically get longer sequences(which I’ll cover in the next post).
If you’d like to play with the settings I’ve placed a fair amount of documentation within the code. Just let me know if there’s any questions.
Attached here is the plugin you can use to sequence data for this pic code. Just copy the dll file to the Vixen->Plugins->Output folder and start up Vixen.
Create a sequence with the number of channels you would like…I’m assuming 16 at this point and attach the RenTester output plugin.
Next, create the sequence and when finished play it. After the sequence finishes a dialog box with the necessary data in it will be displayed. Click the ‘Copy to Clipboard’ but to …wait for it…copy the data to the clipboard. Open the pic code in MPLAB, scroll down to the bottom and replace the table and its data with by pasting the clipboard contents overtop of it.
As for how long the sequence can be. Short answer, I don’t know. As long as the entire data table can fit into the program space you should have no problems. The more channels you use the more data so the shorter the sequence.
You’ll have to let me know if this works for want you want. As stated earlier if the timing isn’t working for you or if you would like longer sequences we’ll need to port this to a more robust pic(which happens to be cheaper than the 16f688…bonus!).
After some research I found that something like this has been done before: http://doityourselfchristmas.com/forums/showthread.php?10483-stand-alone-Renard-card-code&p=106716#post106716
Phil even made a board that would record a data stream and then play it back to any connected Renard controller: http://doityourselfchristmas.com/forums/showthread.php?10483-stand-alone-Renard-card-code&p=118886#post118886
I don't know where or even if these designs were published beyond the links above.
A user named Kris (ActiveHouse) made a stand alone version of the LED Trix which may be adaptable to what you want: http://doityourselfchristmas.com/forums/showthread.php?2035-Stand-Alone-Controller&highlight=stand
ctmal,
I tried getting this setup but I don't get anything on the output, just an "all on" state. Even if I use the asm you provided I don't see any movement in the lights. When I tried to copy a new table in it was on a Ren SS 8 board so it only had 8 channels with 100ms timing. Is there anything else that needs to be done?
