Stand Alone Mega Tr...
 
Notifications
Clear all

Stand Alone Mega Tree

18 Posts
7 Users
0 Reactions
8,700 Views
Posts: 53
Topic starter
(@casanovass)
Trusted Member
Joined: 16 years ago
[#19802]

After my show last year I had a friend ask if I could make a mega tree that just ran through a couple pre-determined sequences with no music. I'm wondering if anyone else has attempted this. What I was thinking/hoping for would just be a Mega Tree with either a Ren8ss or Ren16ss and then program the pics to just run through a sequence whenever powered on. Essentially working like a dignostic pic. Could anyone point me in a direction to make this happen?

Thanks,
Jason


17 Replies
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

If you don't require it sync'd to music(or anything else for that matter) I might have something that will work for you. Just let me know.


Reply
Posts: 53
Topic starter
(@casanovass)
Trusted Member
Joined: 16 years ago

No, I'm not trying to sync it to anything.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

Actually, rereading your origional post, I do think I have something for you. It's not exactly finished firmware but it really just needs some testing and it will be complete.
Here's what I have: I modified the Renard firmware for a Renard Tester that I am working on. Basically what this firmware does is that it creates Renard packets from a table and sends them out. When signals come in, the 1st 8 are used to trigger the pics output pins and any remaining channels are dropped.

So... what does that mean? One of two things. Either your Megatree Renard controller(s) could be sent a signal using an external device(such as the Renard tester I haven't finished yet) or I'm hoping you'll be able to program the 1st pic of your controller with the firmware and It'll basically control everything(this is the part that needs a bit more testing).

Let me know if this sounds like what you need and if so which route would you prefer?


Reply
Posts: 53
Topic starter
(@casanovass)
Trusted Member
Joined: 16 years ago

I was hoping for a system that I wouldn't need any external devices. I wanted to keep it as simple as possible, so I think the 2nd option you mentioned sounds perfect. That way I can just power up the controller and it'll do its thing.

If there's anything I can do to help let me know.

Thanks


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

I think I can get things worked out this week. Do you have a pic programmer? Basically with the firmware you would need to sequence the megatree in Vixen then run it using an Output plugin I created. The plugin just creates the data table in which you can just copy and paste the code into the firmware.


Reply
Posts: 53
Topic starter
(@casanovass)
Trusted Member
Joined: 16 years ago

Yeah, I can program the chips. When i first thought about this I thought it would involve programming the sequence with C#, so using an output plugin with Vixen would be awesome.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

Keep in mind that depending on how many channels you have the length of the sequence might be seriously limited. I have no real figures at this point so once I get everything tested you might have to 'play it by ear' to figure see how long you can get or if it is the right solution for you. Either way I'm sure we can work something out.


Reply
imbluenote
Posts: 1615
(@imbluenote)
Noble Member
Joined: 15 years ago

if you do get something can you post the firmware here...I have another part of my yard that i have a "static" display, but would like to add something simlar.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago
imbluenote wrote:if you do get something can you post the firmware here...I have another part of my yard that i have a "static" display, but would like to add something simlar.

Absolutely. Once everything is test and I'm comfortable with it everything will get posted for anyone who would like to use it.


Reply
Page 1 / 2
Share: