Sprial Tree would t...
 
Notifications
Clear all

Sprial Tree would this work

12 Posts
10 Users
0 Reactions
6,007 Views
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
[#16725]

Ok so I am wondering, if i attach my lights normally then just spin my pole would that create the same effect. Just leave a little slack in my strands.

Thanks
John


11 Replies
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

If there's not enough slack all the twist will be at the top. Even with slack I don't think it would work. You need something to support (hold) the strings at various places on the way down. With slack and wound loose it'll fall down (in?) and not be full looking or even spiral.
Note I love the outside the box thinking!

Brian


Reply
Posts: 488
(@dj-merritt)
Honorable Member
Joined: 18 years ago

I feel because of the shape of the tree, bigger at the bottom than the top , when you spin it would wind at the bottom and not at the top. you would have to hold the spiral strands away from the bottom in order to get any kind of even spiral . if you have one person to hold each spiral strand then it would work IMO.

PS>> I want to watch the video of you spinning that tree with all your lights on it connected to the hoop at tree base .


Reply
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago

My base weighs about 200lbs and my pole is loose in the ground so it could spin. Now looking at it would probably look more like a wrap vs a spiral.

John

PS Did not want to make a new post,so a follow up

1.What comes first the spiral or classic style if using both elements.

2. That leads into a bit of a tricky situation. Since now I am going to have to get a ladder up there to attach the top spiral strands and attach to the guy wire. With all the other lights on. Seems messy. A week from today it go up so I can work on it.

John


Reply
Posts: 261
(@henedce)
Reputable Member
Joined: 18 years ago

Hmmm I have been toying with an idea using spinning rings , maybe I can adapt to this principle . Easy enough to set up using a copper ring set into a non conductive disc using a spring loaded contact .... hmmm food for thought


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

If using both classic and spiral, I would recommend the classic strings be attached first. This way you can still get a ladder in/out of the interior. As you put the spirals on, this becomes harder and harder to achieve. (at least, it did on my first attempt at a sprial)


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago
LabRat wrote:If using both classic and spiral, I would recommend the classic strings be attached first. This way you can still get a ladder in/out of the interior. As you put the spirals on, this becomes harder and harder to achieve. (at least, it did on my first attempt at a sprial)

+1. Also, the classic run lights help support the spirals - somewhat. This year was my first attempt at it also.


Reply
Posts: 123
(@randyn)
Estimable Member
Joined: 17 years ago
LabRat wrote:If using both classic and spiral, I would recommend the classic strings be attached first. This way you can still get a ladder in/out of the interior. As you put the spirals on, this becomes harder and harder to achieve. (at least, it did on my first attempt at a sprial)

Same here. I did a classic mega with 36 strings total ( 12 red, 12 blue and 12 strings of green) and added 12 strings of white in a spiral. I just added them 1 by 1 and adjusted the spacing so that it looked good. The spiral part took me an afternoon.

Randy


Reply
corytcline
Posts: 1249
(@corytcline)
Noble Member
Joined: 16 years ago

has anyone spiraled a real tree?


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Tried, but digging up the roots to twist the tree was too difficult. Much easier to spiral the lights instead.


Reply
Page 1 / 2
Share: