mini mega tree by a...
 
Notifications
Clear all

mini mega tree by a newbie

4 Posts
4 Users
0 Reactions
4,063 Views
Posts: 2
Topic starter
(@james-bieniek)
New Member
Joined: 15 years ago
[#16724]

hi,

im thinking of doing a mini mega tree this year and wondering what you guys think, about my idea for construction. im thinking of using a 12' peice of emt or as others have mentioned, fence pipe (based on cost). driving that 3 feet into the ground with a 5 foot diameter ring 1 foot off the ground. im thinking about 10 or 11 strands to the peak tied to 1/8 or so cable to the top mount. that would give me a strand every 6 to 8 inches. now as for wind sway, what would you suggest a solid mount from pole to ring or a couple guys from ring to pole?

looking for what has worked for you all.
this is my first year and plan to add 3 more circuits of lights around windows doors etc. a 5 dia. wreath on the grage wall above the doors, and if i can do it, i want to do simple arches along the front walk to my door. aside from putting lights up and plugging them in i am a total newbie here. so any help is greatly appreciated. i want to do this to honour my grand mothers favorite time of year who suddenly passed last spring.

please help folks.

James


3 Replies
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Welcome to DIYC! For your megatree I'd say 1/16th inch cable is fine when your using so many. I'd make it a even number of strings (ten rather than 11). Make the cables a foot longer, take them all the way to the ground and stake them in. You can tie your ring to them also. When your timing to music it's easier to use units of 4 (so 12 strings or 16 strings). And controller normally have channels in groups of 8 (so 8 strings or 16 strings). Anyway there's some food for thought that might drum up some more questions. And the only dumb question is the one that isn't asked. Keep it fun!

Brian


Reply
bcstuff
Posts: 449
(@bcstuff)
Reputable Member
Joined: 16 years ago

Oldcqr has a couple of nice articles on his website. You may find this one helpful:
http://www.landolights.com/main/content/view/80/39/


Reply
DennyMo
Posts: 236
(@dennymo)
Reputable Member
Joined: 19 years ago

I zip-tie my strands to paracord. In addition to relieving the weight off the lights, the paracord also doubles as a guy line.


Reply
Share: