Request for ideas -...
 
Notifications
Clear all

Request for ideas - material for "shaping hoops"

7 Posts
4 Users
0 Reactions
2,901 Views
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago
[#21943]

I'm evolving my MegaTree design from last year, building upon the good work done by Walter and Jackie Monkhouse (and others). We are using shipping strapping to support pixels. The size of the tree precludes tensioning the strapping enough to get close to a straight line from the tree top to ground (just 10# tension on each strap would mean over half a ton of added weight beyond the actual tree weight). So I'm going to use some form of skeleton to provide the correct shape for the tree. Last year I used a tubing bender and fabricated 6 circular hoops of different diameters out of 1/2" EMT. They also bore some weight so had to have some strength. That worked, but this year the strapping is strong enough so that the hoops don't need to bear any weight at all. Their only pupose is to keep the strapping hanging at the correct diameter relative to the centerline of the tree. I'd like to use something other than the 1/2" EMT hoops that is less obvious to the eye. There has to be enough rigidty to not collapse against the pressure inward (towards the center of the hoop). It has to be easily workable without specialized equipment. Rebar is too much, 14AWG copper wire is too little. Cost is a factor - I expect to use about 250 linear feet.

My father had a large spool of rigid aluminum wire he said was used to tie down cargo on railroad flat cars. He had it for as long as I knew him. I have no idea what it was called or where to get it or what it would cost - but it would probably be perfect for this use.

Any suggestions, and sources? Thanks in advance.


6 Replies
crazy_carpenter
Posts: 369
(@crazy-carpenter)
Reputable Member
Joined: 15 years ago

Here is a link you can look at that may give you some ideas. http://www.wireproducts.us/products-construction.shtml


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Munkhouse used straps weaved horizontally between the vertical ones like a basket to help maintain shape. It's in the "how to" on his website.

Brian


Reply
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago

@crazy_carpenter: That looks like something I had in mind. I'll have to see if I can get it in time (and in budget). Other sources/ideas still appreciated.
@Skunkberg: I plan to use the basketweave technique also. Those horizontal straps are to help keep the vertical straps from twisting (to keep the pixels pointing outwards). I don't think it will be rigid enough to keep the overall shape of the tree.


Reply
crazy_carpenter
Posts: 369
(@crazy-carpenter)
Reputable Member
Joined: 15 years ago
ags0000 wrote:@crazy_carpenter: That looks like something I had in mind. I'll have to see if I can get it in time (and in budget). Other sources/ideas still appreciated.
@Skunkberg: I plan to use the basketweave technique also. Those horizontal straps are to help keep the vertical straps from twisting (to keep the pixels pointing outwards). I don't think it will be rigid enough to keep the overall shape of the tree.

Yeah, that is just a google search link that I put up to let you know what is out there. You can probably find it locally from any decent construction supplier in your area.


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

If the horizontal basket weave strap is attached to the upright (small tie wrap diagonally across the intersection, pop rivet through a melted hole?) then for the vertical to twist it would have to pull ALL the other verticals and that should not be possible. Another thought might be schedule 70 thinwall PVC 1/2" as that should be able to be bent into a circle and attached back to itself with a coupler. Maybe not all the way at the top of the tree, but would likely work on the bottom 1/2 or 2/3rds of the tree.

Just a thought...

What about this:

http://www.homedepot.com/h_d1/N-25ecodZ5yc1v/R-202257645/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=1%2F2%22+PVC+pipe#.UKFn_8V9Ldc

The "flexible" in the description sounds very interesting.


Reply
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago

Can't put holes in the strapping or it will fail. Even with the zip-tie method, the strapping is not rigid enough to keep the tree at the proper diameter. The basket weave strapping will keep the pixels facing in the correct direction (out) but not the tree in the correct shape (conic).
Thanks.


Reply
Share: