I am working on my mega tree this weekend. It will be 16 ft. plus a 2 ft. star at the top. Pole will be 1.25" EMT. I intend to add guy wires at about 14.5 ft. Is there any guidelines on how long the bottom leg should be in relation to the height. That is if I am 14.5 high, should I then be 14.5 ft. away from the base of the pole. Attached is a picture of my megatree base. It will be a trunk type with an inside spirals.
If you can do 45 degrees that's great but you only need 30 degrees, the top angle or 60 at the bottom, to be safe. Hams put up much larger towers and only run about 30 degrees since most don't have room for 45. Since your only 16ft I think you could keep you guy lines just clearing the inside the base ring and still be fine.
I really like that you use a old cable spool for the base. It's a great idea if one can find them. A lot of the time those spools get send back to the wire manufactures and reused. Looks like you can also put your controllers around the inside of the spool which is really cool and to hide them just cut some coro or other plastic and put it inside in sections so you can slide them out of the way.
One suggestion is that you run some cable from the base of the spool to the rings. That would help keep them from flexing upward when you pull the strings tight. Then you may be already doing that.
Can wait to see pictures of your finished tree.
John
30 degrees wouldn't seem to provide enough support. Maybe we are not talking the same angles. I'm thinking the angle between the pole and the guy wire at the point where it attaches to the pole. If I remember correctly mine are not exact, but all are 45+ degrees. My tree has lasted 3 seasons and last two years so some significant wind.
I also think its better to have the guy wires near the top, but not at the very top. I believe mine are at 12 feet and my tree is 15ft tall.
Thanks, I'll go with the 45% or legs equal to height of guy tie off.
I originally made the cross members of the base out of 1" PVC but felt there was too much flex. Also found out that 1" EMT has a smaller OD than PVC. Ended up using 1.25 EMT over 1" PVC which fit perfectly. Used U=bolts to anchor to cable spool and there is no flex now. I am planning to see how the rings handle the upward pressure and will use your idea of downward guy wires if they flex too much.
The wire spools, I have a spare, came from a pallet company near London, Ohio. They had a dozen or so sitting out front and I stopped and asked if I could buy or have one. They said to take as many as I needed.
45 degrees is the best. And the more the better. At 45 three will work fine. If you desire the angle to match your lights it would require many more guy wires to give you the same stability. I use 16 guy wires on a twenty foot pole and tie wrap my lights to them. Ham operators are looking for the best bang for the buck, but for us other factors could come into play, space (can't put a guy wire in the house very well), trip hazard, aesthetically, etc.
Brian
Just food for thought, I went with 3 guy wires tied attached to the top of the megatree and 3 guys wires attached at the halfway point. It's probably overkill but I've seen plenty of pictures of megatrees that have buckled in the center.
While 45 deg is the 'ideal', IMHO it is certainly not necessary on a Mega Tree. As posted previously, 30 deg at the top, 60 at the bottom is more than sufficient (Isosceles Triangle). Reason, every string of lights will also act as a sort of 'guy wire' and add greatly to the stability of the tree. You also only 'need' 3 guy wires, not 4. 4 will give you a bit more support, but 3 is plenty. Look at the professional radio towers and you will see 3 sets of guy wires (but you will also see more than one wire for each leg due to the height of them). I have 2 16' trees. with 30" 4 way stars on them and they have withstood 75 mph winds guyed as I have described.

