Was looking at different design ideas for a topper, i.e. sparkle balls, stars, led fireworks ball. I came across the link below. You would need some modifications to have this outside and subject to the elements but, it would be very cool.
That's pretty cool.
This would be an awesome topper for anyone with an indoor display, though it'd be a challenge to sequence it because those LED flash in milliseconds and someone would have to design something like this to work with Vixen.....any volunteers? 😛 And you'd probably have to create it's own addin to program it to. But this is would be an awesome Mega Tree topper! Maybe someone here can design something like this, I know I can't because I'm not that smart :/
I have looked at that video for years.
He would be rich by now if he had ever marketed it.
Freeze it at 12 seconds, and you will see it is only 4 to 6 inches high at the most.
1000+ RPMs on two different axises.
Probably a balance and centrifugal force issue.
Reminds me of the globe dropping through the rings in the movie contact.
JOel
jem5136 wrote:This would be an awesome topper for anyone with an indoor display, though it'd be a challenge to sequence it because those LED flash in milliseconds and someone would have to design something like this to work with Vixen.....any volunteers? 😛 And you'd probably have to create it's own addin to program it to. But this is would be an awesome Mega Tree topper! Maybe someone here can design something like this, I know I can't because I'm not that smart :/
I'm not sure how much flashing, if any, the lights are doing. If you notice at the beginning the leds are rotating and then the base begins to rotate. I believe the L-shape 2 x 4 arm also rotates. Here is another video where he has three rotating axis points. The third rotating axis doesn't start until 1:08 into the video.
Below is info on how he built it... not a step-by-step but, informational.
http://laserpointerforums.com/f57/led-orb-2-0-a-50012.html
