I have a few questions for the board and any information is appreciated:
Can I mix my Renard 24ss boards with other boards that support pixels for a mega tree using a version of Vixen?
What board do you recommend for Pixels?
What set of pixels are commonly used and bought from?
What version of Vixen would you use?
Any information is appreciated!
Thanks!!
R/
mike
Yes you can mix boards. Renards are serial and most pixel boards are E1.31 (ethernet). Or use a bridge to run both. Or use the Renard PX1 if your not using too many pixels. That's about half the answers on hardware. SanDevises E682 is my favorite pixel board. I use Vixen 2.1 still. I'm going to leave the pixel field for the next guy.
I am running 12 Renss controllers, and added the E682 this year. I am running the E682 on it's own network cable, but you can send renard signal out through the E682 (giving up 4 connections.) I have a PX1 to mess with, but haven't yet. I am planning to add a Ren32 next year to run some RGB floods.
I made the switch to Vixen 3, and like it. I am going to look at using xlights also, but run through V3. Waiting for the pre-sale from diyledexpress to order more 2811 pixels for the mega tree!
I have renard boards controlling my windows and stuff and then 2 px-1s for my tree and star
the thing you have too know is a comm port can only do so many channels depending on what baud rate you can set and what ms timing you use in your vixen sequencing my tree as a whole is 984 channels then i have my other channels on the windows and props and stuff so they add up quick i have mine on separate comm ports this will show how many channels are possible depending on your setup http://www.doityourselfchristmas.com/wiki/index.php?title=Renard#Number_of_Circuits_.28Channels.29_per_Serial_Port
Thank you so much for the information! I am off to the drawing board for next year's display.
